MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 17 posts ] 
  Previous topic | Next topic 
Author Message
trainmen
 Post subject: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 29th, 2025, 21:57 
Offline

Joined: July 29th, 2025, 21:36
Posts: 6
Location: Germany
Hello,
ich switch the pcb board from the old hdd with a "new" one. I dlash first the new ROM File on the chip.
Over TTL i cant switch in F3.

I only get this message:

Code:
Boot 0x40M                                                                   
Spin Up                                                                 
Trans.                                                                   
Spin Up                                                                 
SpinOK                                                                   
TCC:001C                                                                                                                                                   
(P) SATA Reset


HDD Data:
Model: ST1000DM003
PN: 1CH162-305
FW: CC47

PCB: 100717520 REV B

Firmware file in the attach


Attachments:
hdd_old_rom.rar [247.49 KiB]
Downloaded 21 times
Top
 Profile  
 
Lukas
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 2:48 
Offline
User avatar

Joined: July 10th, 2022, 15:11
Posts: 126
Location: Poland
Maybe start from the beginning, what's going on with the drive?
The ROM is locked to RS communication by default, so you can't do anything without unlocking it.

_________________
Data recovery Poland (RAID, HDD, SSD) - https://hex-serwis.pl
Top
 Profile  
 
trainmen
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 8:16 
Offline

Joined: July 29th, 2025, 21:36
Posts: 6
Location: Germany
The HDD isn't recognized in the BIOS. The motor is spinning and the read head is moving. How can I unlock the firmware?
Top
 Profile  
 
Lukas
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 8:34 
Offline
User avatar

Joined: July 10th, 2022, 15:11
Posts: 126
Location: Poland
So, as usual, if the hard drive boots, replacing the electronics is pointless.
The ROM can be unlocked using tools like PC3000/MRT/DFL.

_________________
Data recovery Poland (RAID, HDD, SSD) - https://hex-serwis.pl
Top
 Profile  
 
trainmen
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 8:55 
Offline

Joined: July 29th, 2025, 21:36
Posts: 6
Location: Germany
Ah, sorry you mean the old own. The old own do nothing. I get no messages by powering on.
Top
 Profile  
 
SWM
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 11:36 
Offline

Joined: February 22nd, 2023, 13:49
Posts: 327
Location: Eastern Europe
Blocked terminal on 1CH162?.. Interesting, I hear about it for the first time. :)
And where is the message from Grenada - "Terminal is blocked"?
trainmen,
When shorting the Tx-Rx adapter, the characters are printed ?
And I don't remember what the terminal voltage levels are on the Grenada.
Sometimes it helps to wait 10-15 minutes to get to the terminal.
Top
 Profile  
 
Lukas
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 11:45 
Offline
User avatar

Joined: July 10th, 2022, 15:11
Posts: 126
Location: Poland
SWM, Have you checked the ROM from the attachment?

_________________
Data recovery Poland (RAID, HDD, SSD) - https://hex-serwis.pl
Top
 Profile  
 
SWM
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 11:52 
Offline

Joined: February 22nd, 2023, 13:49
Posts: 327
Location: Eastern Europe
Lukas, The checksums match the calculated ones.
Top
 Profile  
 
Lukas
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 11:57 
Offline
User avatar

Joined: July 10th, 2022, 15:11
Posts: 126
Location: Poland
SWM, My mistake, you're right. This version isn't locked :D
trainmen, Ah, sorry you mean the old own. The old own do nothing. I get no messages by powering on
The disk itself did not turn on?

_________________
Data recovery Poland (RAID, HDD, SSD) - https://hex-serwis.pl


Last edited by Lukas on July 30th, 2025, 12:02, edited 1 time in total.

Top
 Profile  
 
SWM
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 12:00 
Offline

Joined: February 22nd, 2023, 13:49
Posts: 327
Location: Eastern Europe
Trans implies successful loading of 20E(20F).
Missing small change - (H) SATA Reset...
But, perhaps, the host was not connected. :)
Top
 Profile  
 
SWM
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 12:05 
Offline

Joined: February 22nd, 2023, 13:49
Posts: 327
Location: Eastern Europe
Or the SATA connection has a fault in something (hostport-cable-deviceport).
Top
 Profile  
 
Lukas
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 12:08 
Offline
User avatar

Joined: July 10th, 2022, 15:11
Posts: 126
Location: Poland
It looks that way, but that doesn't explain why he can't get to the terminal...
Or maybe he didn't even try :D
What happens if you try to press CTRL+Z?

_________________
Data recovery Poland (RAID, HDD, SSD) - https://hex-serwis.pl
Top
 Profile  
 
SWM
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 12:14 
Offline

Joined: February 22nd, 2023, 13:49
Posts: 327
Location: Eastern Europe
Maybe it's for the best... If it's not the HDD that's faulty...
Top
 Profile  
 
trainmen
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 16:52 
Offline

Joined: July 29th, 2025, 21:36
Posts: 6
Location: Germany
@ Lukas
I understand it right, i need to shorting the rx and tx channel cable? I am locking all right for a shorting point, but i dont find anything.
I wait now 20 minutes but nothing happens.

Yes the disk dont turn on and now output over TTL.

If i press CTRL + Z, nothing happened.
Top
 Profile  
 
pepe
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 30th, 2025, 18:11 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
does ctrl-z do anything on the donor? It should. On the patient as well. Are you using an adapter capable of 1.8V signaling?
pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
trainmen
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 31st, 2025, 18:11 
Offline

Joined: July 29th, 2025, 21:36
Posts: 6
Location: Germany
Are your sure it is 1,8V and not 3,3V? I use 1,8V and I read i need 3,3V :/
I see only my command in the terminal, but no answer.
I try it with putty, realterm and seagate tools.
Top
 Profile  
 
trainmen
 Post subject: Re: ST1000DM003 1CH162-305 CC47, no F3, no boot
PostPosted: July 31st, 2025, 19:39 
Offline

Joined: July 29th, 2025, 21:36
Posts: 6
Location: Germany
Okay, i find my problem. My cable was at the wrong Pin :lol:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 17 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 46 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group