MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Intenso 256GB - dead
PostPosted: Yesterday, 11:11 
Offline

Joined: November 17th, 2026, 12:49
Posts: 3
Location: germany
Hello forum,

let me introduce myself briefly, i am an electronic engineer from Germany and htis is my first encounter with SSD failures.
So i dont know about PC3000 or SMI MP-Tool .

I had this Intenso 256gig SSD drive plugged into USB via USB-Adapter and last action was to erase a bigger file.
I then just pulled it out of the USB port of the Windows PC.

Later re-inserting it - and - nothing. No Drive Letter appeared. It was non existend. completely dead.

I had some important files on it.

Ok, i searched the forums, reading about ROM mode, flash chip identification, PC3000 rescue software and the SMI tools.

I checked the Voltages, 3.3V, 1.2V and 0.9V, all good.

There are 3 LEDs og which the middle LED was constantly on, indicationg ? Power?

Then there are these jumper connectors, 2 upper, 4 lower.
I guess the top one is for ROM mode, the others are ??? what?

ROM mode is when the sm2259 controller enters a service mode ?

What can you then read out of it ?

ched some light in my empty brain ;)


Attachments:
myssd.jpg
myssd.jpg [ 2.25 MiB | Viewed 972 times ]
Top
 Profile  
 
 Post subject: Re: Intenso 256GB - dead
PostPosted: Yesterday, 12:17 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17373
Location: Australia
Did the SSD identify itself in ROM mode?

For reference ...

BL8028, Shanghai Belling, Synchronous Buck Converter, 1.5A, 2MHz, 2.6V - 5.5V in, marking GUyw, SOT23-5:
https://www.belling.com.cn/media/file_object/bel_product/BL8028/datasheet/BL8028_V1.13_en.pdf

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Intenso 256GB - dead
PostPosted: Today, 8:56 
Offline

Joined: November 17th, 2026, 12:49
Posts: 3
Location: germany
Hi,

I do not know howto enter ROM-mode.
Do you know which jumpers i have to short to enter it? ( see foto)

What are all the other 4 jumper/connector-holes for?

If in ROM-mode, PC will see what?

Thanks


Top
 Profile  
 
 Post subject: Re: Intenso 256GB - dead
PostPosted: Today, 9:23 
Offline

Joined: November 17th, 2026, 12:49
Posts: 3
Location: germany
Sorry, i just tryd it with the upper jumper and it worked.

ROM.png = Devicemanager Ankeje USB3.0 SCSI Disk

diskman.png = Storage management, new Disk_1 , 1GB, not initialized

OK


Attachments:
ROM.png
ROM.png [ 147.37 KiB | Viewed 258 times ]
diskman.png
diskman.png [ 134.56 KiB | Viewed 258 times ]
Top
 Profile  
 
 Post subject: Re: Intenso 256GB - dead
PostPosted: Today, 9:53 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17373
Location: Australia
That means that the SM2259XT controller has basic sanity, which in turn suggests that the SSD has a firmware problem, probably due to bad NAND.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group