MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: April 2nd, 2008, 6:02 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
Hi All,

I have a Seagate ST96812A 2.5" IDE hard disk with a ata-password set on the disk. The password is unknown and needs to be removed.

This disk was actually removed from a Maxtor External USB hard disk, the owner was not aware of any password on it. I have tried all the passwords they guessed, none of them were correct.

I have a PC-3000 UDMA and cannot find a way to remove the password for this model as it does not appear to be supported by the PC-3000 UDMA for 'security erase'.

I have also tried Repair Station (http://www.hdd-tools.com) but this cannot remove the password from this model disk either.

Can anybody suggest any way using ANY tool which can remove the password from this disk?

Thanks a lot for any help.


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: April 10th, 2008, 9:26 
Offline

Joined: September 27th, 2005, 8:21
Posts: 765
You can try Shinobi from YEC: http://www.yec-usa.com/products/shinobi.htm

It comes with Atola Unlocker module made by us; it supports 2.5" Seagate and even Hitachi hard drives.

_________________
Dmitry


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: April 13th, 2008, 9:37 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
Do you know if it supports a Seagate ST96812A? Do you know how much this costs?


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: April 21st, 2008, 12:29 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
*bump* Any answer to this last question?


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: April 21st, 2008, 16:33 
Offline

Joined: April 14th, 2008, 12:23
Posts: 29
Have you tried a firmware update? Perhaps yours is one that will lose its password when updated.

http://files.hddguru.com/download/Firmware%20updates/Seagate/


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: April 21st, 2008, 16:45 
Offline

Joined: April 14th, 2008, 12:23
Posts: 29
This guy has helped a lot of people solve password issues, mostly BIOS passwords for Dell laptops. There is a huge history of questions and answers in several threads at http://www.techspot.com/vb/index.php. He apparently partnered-up and has his own answers site at http://www.download.centre4service.com/home.html

Anyway, he posted someone else's story about a laptop hard drive, where the password was controlled in the PC BIOS:
http://www.download.centre4service.com/harddrive.html

...Curious, even if not exactly applicable.


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: October 12th, 2008, 18:37 
Offline

Joined: October 12th, 2008, 18:07
Posts: 2
1. Dowload the "HDDErase" application from "http://cmrr.ucsd.edu/people/Hughes/SecureErase.shtml"

2. Burn the image to CD which comes with app.

3. Boot your computer with the CD and follow the instructions.

It unlocked my Seagate ATA drive, but I don't if it will help you. :wink:

And, thank to this guy; Dr. Gordon F. Hughes


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: October 13th, 2008, 2:38 
Offline
User avatar

Joined: September 2nd, 2008, 12:14
Posts: 447
Location: Austria / Europe
I have the impression, that some of the answers here oversee, that
the question was "unlock" the drive - which is different to the usual
advice "erase + unlock"

I times of very, very cheap drives, I assume its always about "restore
or get access to data" instead of just refurbishing an onld 20 or 40GB
drive....
***

In all the published informations of available soft- or hardware I find
this point always unclear.
I.e. HDD-Erase will once started lock the drive and not unlock it until
the erasure process is finished.

Is there a tool on the market which definitely unlocks the drive without
erasing the data?


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: October 13th, 2008, 3:01 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Yes, not free tools but there are. PC3000 for example, or you need to access the SA And work with security subsystem. Sometimes this feature need additional HW.


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: October 13th, 2008, 6:51 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
Salvation Seagate Doctor is the solution.

http://salvationdata.com/data-recovery- ... iew.htm#a1

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: October 13th, 2008, 7:25 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
BlackST wrote:
Yes, not free tools but there are. PC3000 for example, or you need to access the SA And work with security subsystem. Sometimes this feature need additional HW.


to access Seagate SA (HW is must)

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: July 7th, 2010, 12:14 
Offline

Joined: November 14th, 2007, 12:21
Posts: 3
shahij wrote:
to access Seagate SA (HW is must)


You can access the SA by terminal, you do not need to buy the HW. :)


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: July 9th, 2010, 15:18 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
terminal is the hardware .


Top
 Profile  
 
 Post subject: Re: ATA-Password on a Seagate 2.5" IDE? Any way to remove it?
PostPosted: July 9th, 2010, 17:02 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
rameez wrote:
terminal is the hardware .


Yes is HARDWARE SPECIAL!! :mrgreen:

_________________
Нет ничего невозможного


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Vipys113 and 71 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group