MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 32 posts ]  Go to page Previous  1, 2
  Previous topic | Next topic 
Author Message
Arthur
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 20th, 2008, 6:46 
Offline

Joined: October 4th, 2007, 12:07
Posts: 116
Doomer wrote:
guru wrote:
thats a head problem 100%

no, it's not

Doomer
I have been able to recreate this failure exactly with a 100% healthy disk. The problems is in SA. But according to my experiments, I suspect that the primary cause maybe could be a weak head. Any comments on this?
Top
 Profile  
 
Doomer
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 20th, 2008, 14:34 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
I don't know the exact primary cause

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 20th, 2008, 14:52 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
This subject is very sensitive
All comes down to a fact if you are willing to let someone else do that or not.

_________________
www.datarecoveryne.com
Top
 Profile  
 
guru
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 20th, 2008, 17:24 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
To be exact Doomer it's a head load error.... Check your big 7200.11 Engineering manual ;o)

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
Arthur
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 20th, 2008, 18:11 
Offline

Joined: October 4th, 2007, 12:07
Posts: 116
guru wrote:
To be exact Doomer it's a head load error.

No, not according to my tests ..
Top
 Profile  
 
Doomer
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 20th, 2008, 18:24 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
guru wrote:
To be exact Doomer it's a head load error.... Check your big 7200.11 Engineering manual ;o)

That's is not true :)

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
hddguy
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 21st, 2008, 4:39 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
Guru and Doomer both work at seagate DR, am i right? That will make for an interesting read to see who is right :roll:
Top
 Profile  
 
guru
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 21st, 2008, 5:14 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
LOL...

Well it's new technology at the moment. Still stand by what I said.. However, could be 2 causes thats true...

Head load error could mean both I guess... 1: Bad Head 2: Unable to load code from media (Which would point to SA, so Dommer could be correct) You would probably need to drill down a little to find exact cause

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
Doomer
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 21st, 2008, 10:22 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
hddguy wrote:
Guru and Doomer both work at seagate DR, am i right? That will make for an interesting read to see who is right :roll:

We actually one person :mrgreen:
Sometimes we don't even know who we will be this morning
Am I mad, am I mad? Ooohahahahahahha :mrgreen:

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
DataRecGuy
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 21st, 2008, 10:29 
Offline

Joined: May 2nd, 2007, 10:31
Posts: 33
I'm not thinking it is a head problem. Most of the ones we get read very well after fixing the problem. Some read slow in spots but not only on one head.
Top
 Profile  
 
guru
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 21st, 2008, 11:16 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
Well then lets stop swinging our pen1s. In your case it's SA in another case it could be a bad head

Doomer

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
HardDiskBug
 Post subject: Re: Seagate 7200.11 Error Code
PostPosted: November 22nd, 2008, 4:06 
Offline

Joined: October 19th, 2006, 11:56
Posts: 217
hddguy wrote:
Guru and Doomer both work at seagate DR, am i right? That will make for an interesting read to see who is right :roll:

Guru is Western Digital........
At least it's what it sounds.......

Although, if it's true, then it would be interesting still to watch Seagate vs WD.... :wink:

_________________
I just hate spammers...It was a Spammer, who ruined my life!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 32 posts ]  Go to page Previous  1, 2

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: melvin and 52 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group