MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
blusowiec
 Post subject: HD322HJ - doesn't work and is not detectable.
PostPosted: March 30th, 2009, 3:39 
Offline

Joined: March 30th, 2009, 3:02
Posts: 4
Location: Poland
Hello,

I need some help with my hard drive. 2-3 sec. after power-on I hear a buzzing noice. The report from the terminal is:

--- cut ---
PSL

++ SU
MaxPhyHead = 0006
RPM at Handoff: 018A
tSHOS - Released on 2008/04/18 15:1
2 by sec
DRAM=16MB SoC=26A3
SHOS-(1AC12a9M.a11)
L=00000000,00000000
<SpinOn_2>KeepSpinOn!
RV Circuit Enabled
Temp : 25 degC
SpinOk
mServoStatus1 00000003
ADC Time Out!
ADC Time Out!
...
ADC Time Out!
ADC Time Out!
PSL

++ SU
MaxPhyHead = 0006
RPM at Handoff: 0184
tSHOS - Released on 2008/04/18 15:1
2 by sec
DRAM=16MB SoC=26A3
SHOS-(1AC12a9M.a11)
L=00000000,00000000
<SpinOn_2>KeepSpinOn!
RV Circuit Enabled
Temp : 24 degC
SpinOk
mServoStatus1 00000003
ADC Time Out!
ADC Time Out!
...
ADC Time Out!
ADC Time Out!
UF 3 1stGrayErr
Vel Parking!
PK_3 C: 0 H:0

++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1

++ SU
MaxPhyHead = 0002
RPM at Handoff: 019F
<SpinOn_2>KeepSpinOn!
RV Circuit Enabled
ADC Time Out!
ADC Time Out!
...
ADC Time Out!
ADC Time Out!
Temp : 24 degC
<SpinAccel_2p1> Accel fails FaultCheck: mSpinAccelCheck1 = 0, mSpinAccelCheck2 =
0, mSpinRPM = 341
<SpinAccelRMaxPhyHead = 0002
1 RPM = 340
<SpinOnRetry> mCOMSENSRty = 0, mAccelRty =
++ SU
MaxPhyHead = 0002
M = 333
MaxPhyHead = 0002
MaxPhyHead = 0002
...
...
ADC Time Out!
ADC Time Out!
Temp : 23 degC
<SpinAccel_2p1> Accel fails FaultCheck: mSpinAccelCheck1 = 0, mSpinAccelCheck2 =
0, mSpinRPM = 334
<SpinAccelRMaxPhyHead = 0002
= 1 RPM = 332
<SpinOnRetry> mCOMSENSRty = 0, mAccelRty =
++ SU
MaxPhyHead = 0002
RPM = 325
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<SpinOn_4>Report Spin Error!
<CheckSpinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002 MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
PSL
++ SU
MaxPhyHead = 0006
RPM at Handoff: 018F
tSHOS - Released on 2008/04/18 15:1
2 by sec
DRAM=16MB SoC=26A3
SHOS-(1AC12a9M.a11)
L=00000000,00000000
<SpinOn_2>KeepSpinOn!
RV Circuit Enabled
Temp : 24 degC
SpinOk
mServoStatus1 00000003
ADC Time Out!
ADC Time Out!
...
ADC Time Out!
ADC Time Out!
UF 3 1stGrayErr
Vel Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
++ SU
MaxPhyHead = 0002
RPM at Handoff: 017E
<SpinOn_2>KeepSpinOn!
RV Circuit Enabled
ADC Time Out!
ADC Time Out!
...
ADC Time Out!
ADC Time Out!
Temp : 24 degC
<SpinAccel_2p1> Accel fails FaultCheck: mSpinAccelCheck1 = 0, mSpinAccelCheck2 =
0, mSpinRPM = 338
<SpinAccelRMaxPhyHead = 0002
lRty = 1 RPM = 338
<SpinOnRetry> mCOMSENSRty = 0, mAccelRty =
++ SU
MaxPhyHead = 0002
PM = 330
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<SpinOn_4>Report Spin Error!
<CheckSpinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:0
++ SU
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
MaxPhyHead = 0002
<CheckS
pinSpeed_0> UF 7 SpnSpdErr
Vol Parking!
PK_3 C: 0 H:1
Unlatch Fail
Vol Parking!
PK_4 C: 0 H:0
LED 1102
LED 1102
LED 1102
LED 1102
LED 1102
LED 1102
LED 1102
LED 1102

--- cut ---

Please, advise me on how I can recover data from my hdd.

Thanks a lot,
Dawid
Top
 Profile  
 
sempre
 Post subject: Re: HD322HJ - doesn't work and is not detectable.
PostPosted: March 30th, 2009, 8:26 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
hi! :mrgreen:
error in rpm... look error.. :idea:

_________________
Нет ничего невозможного
Top
 Profile  
 
blusowiec
 Post subject: Re: HD322HJ - doesn't work and is not detectable.
PostPosted: March 30th, 2009, 10:26 
Offline

Joined: March 30th, 2009, 3:02
Posts: 4
Location: Poland
Do you think it's a problem with rpm of the hard drive? Or is it the engine failure?

I have another drive of the same kind (three first letters of the serial number are the same). What parts in the broken drive shall I replace with the parts from the one that is working in order to fix it?

Thank for your advice.
Dawid
Top
 Profile  
 
BlackST
 Post subject: Re: HD322HJ - doesn't work and is not detectable.
PostPosted: March 30th, 2009, 10:48 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Can be either the PCB (change it from identical drive) , a power supply failure (unlike) or motor. I would suspect the heads too, but motor comes first.
Top
 Profile  
 
beto
 Post subject: Re: HD322HJ - doesn't work and is not detectable.
PostPosted: March 30th, 2009, 11:01 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
Could u post us here that "buzz" sound?
Top
 Profile  
 
blusowiec
 Post subject: Re: HD322HJ - doesn't work and is not detectable.
PostPosted: March 30th, 2009, 12:42 
Offline

Joined: March 30th, 2009, 3:02
Posts: 4
Location: Poland
yes of course, as attachment I post the "buzz" noise...
any ideas, what should i do with my hdd :(

Thanks,
Dawid


Attachments:
hdd.zip [385.43 KiB]
Downloaded 466 times
Top
 Profile  
 
pcimage
 Post subject: Re: HD322HJ - doesn't work and is not detectable.
PostPosted: March 30th, 2009, 12:50 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
If you have a PCB from the same model, try that first. See if the buzzing noise goes away at least.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
beto
 Post subject: Re: HD322HJ - doesn't work and is not detectable.
PostPosted: March 30th, 2009, 18:16 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
Tried like pcimage told u and if the problem still then are spindle or head sticktion problems need to send to a DR professional

Regards
Top
 Profile  
 
blusowiec
 Post subject: Re: HD322HJ - doesn't work and is not detectable.
PostPosted: March 31st, 2009, 6:25 
Offline

Joined: March 30th, 2009, 3:02
Posts: 4
Location: Poland
Thank you very much for your interest and help. I appreciate it a lot.
However, it turned out that my spare Samsung is also damaged :( I have to find another one, and return to this case.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 36 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group