Hi to all hddgurs,

Have this disk with the LED problem.

Fix that, with the udma, now i can have ID, DRD DSC.

But this case when i start copy (green) i just could copy 6 400 xxx sectors.
The rest it give error,
If i change to read with no CRC Control i can have some data but is not OK.

Anyone have this issue after resolving the LED problem ?

Thanks
ZeBong

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

Hi,

I can manage that one if U want to send it over.

pepe

_________________
Adatmentés - Data recovery

Hi,

Have this in the UDMA

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

yes i have try this:

F3 T>m0,2,2,6,0,0,0,22
Max Wr Retries = 06, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewrite Retries = 0000

User Partition Format Successful - Elapsed Time 0 mins 00 secs

But is the same.

I think that the problem is with the P-list.

Something happen when resolving the LED problem.

If you know any commands to regenerate the p-list PM me.

Thanks

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

I am not in the LAB right now.

but for see the plist i think is this:

F3 T>V

but is better to test in a different disk, for dont mess with the patient drive.

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

Problem SOLVED

Thanks for helping.

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

U are welcome

pepe

_________________
Adatmentés - Data recovery

Hi all HddGurus ,

I have a similar problem but with Seagate drive 7200.12 500 GB , it became non detectable in bios suddenly , i checked this forum and found a solution for this issue via terminal commands , followed that , and now the hard disk is accessible in bios but only first 1 -2 Gb are accessible rest are UNCR with all zeros , i checked in Disk editor and other utils ( MHDD , victoria ) everything after first 1- 2 GB is uncr .

commands used .

cleared smart
N1
cleared Glist
i4,1,22
translator regeneration
m0,2,2,0,0,0,0,22

F3 T>m0,2,2,0,0,0,0,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewrite Retries = 0000

User Partition Format Successful - Elapsed Time 0 mins 00 secs
Zone re-format was skipped.



If plist is damaged then Is there a way to reconstruct it via terminal commands , i know there will be swapped sectors and full data recovery is not possible but is there a way i can have a look at whatever data that is left on the drive , right now its all zeros - uncr !!

I have checked this forum and others for last 3 days and got a lot of info on this subject but its not working in my case , any help on this issue would be appreciated , if you do not want to post the commands pls pm me .

If you want me to post the output of defect list let know which one , in my case V10 gives the Plist , V4 is Glist

Cheers,
Nitin

Did you notice that you have a 7200.12?

Yes it is the newer firmware 7200.12 , at first i was also surprised .

so you have the 7200.12 and also with the BUG BSY ?

Can you post the numbers that you have in the cover off the disk.

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"

Thanks for replying , The model no is ST3500418AS 7200.12 , the busy problem is corrected but i have now got unrc sectors filled all over the disk like your first post . Pls let me know how did you turned off CRC control as in your above post .



if i can switch off CRC control i can atleast get some data out !!

Regards,
Nitin

Any suggestions ?

or , pls send me the links to the solutions of this issue , thread with similar issue

Is there a way to reconstruct the plist from cert logs and then use the retranslator command
If you need any more info from me pls let me know !

Cheers,
Nitin

Hi,

We can do it if u are interested.

pepe

_________________
Adatmentés - Data recovery

Hi Gurus,

I got the same problem on a 7200.11.

Only the begining of the disk is readable after LED CC repair.

Please, can someone put me on the way ?

Can solve it in ITALY but have to send the drive.

Cannot share info, but I can do it for you. PM me for pricing.

pepe

_________________
Adatmentés - Data recovery