MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: PCB BAD WD1200UE-00KVT0. OTHER TVS PROBLEM?
PostPosted: September 15th, 2009, 9:59 
Offline

Joined: February 17th, 2009, 13:01
Posts: 111
Location: Bogotá, D.C.
Hi,

When i connect the disc in PC-3000 not spin up. TVS problem? See pictures... where are the tvs in this picture?

thank,

Carlos


Attachments:
DSC04891.JPG
DSC04891.JPG [ 814.42 KiB | Viewed 7913 times ]
DSC04893.JPG
DSC04893.JPG [ 1001.37 KiB | Viewed 7913 times ]
Top
 Profile  
 
 Post subject: Re: PCB BAD WD1200UE-00KVT0. OTHER TVS PROBLEM?
PostPosted: September 15th, 2009, 12:43 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
More likely:

1. Heads stuck on platter or in ramp;
2. Smooth IC bad
3. Fuse open

_________________
http://www.datasaversllc.com


Top
 Profile  
 
 Post subject: Re: PCB BAD WD1200UE-00KVT0. OTHER TVS PROBLEM?
PostPosted: September 15th, 2009, 16:07 
Offline

Joined: November 9th, 2008, 8:18
Posts: 17
Location: Europe
Test diodes D3, D4 with Digital Multimeter


Top
 Profile  
 
 Post subject: Re: PCB BAD WD1200UE-00KVT0. OTHER TVS PROBLEM?
PostPosted: September 24th, 2009, 21:51 
Offline

Joined: February 17th, 2009, 13:01
Posts: 111
Location: Bogotá, D.C.
Diodes D3=1.3 (200 k) D4=1.3 (over 200 k)


Top
 Profile  
 
 Post subject: Re: PCB BAD WD1200UE-00KVT0. OTHER TVS PROBLEM?
PostPosted: September 25th, 2009, 0:43 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1721
try to power up the drive and listen to it carefully.

I agree with jono maybe the heads stuck on platters or in ramp.

good luck


Top
 Profile  
 
 Post subject: Re: PCB BAD WD1200UE-00KVT0. OTHER TVS PROBLEM?
PostPosted: September 25th, 2009, 12:06 
Offline

Joined: February 17th, 2009, 13:01
Posts: 111
Location: Bogotá, D.C.
In case the heads stick to the disc that would have to do I?

Thank


Top
 Profile  
 
 Post subject: Re: PCB BAD WD1200UE-00KVT0. OTHER TVS PROBLEM?
PostPosted: September 26th, 2009, 20:26 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16973
Location: Australia
Something looks very wrong to me.

The manufacturing date on the label is 26 July 2007.

However, the date code on the PCB suggests week 37 of 2006 (3706).

The MCU's date code is week 31 of 2006 (0631).

The RAM is 622B and the motor controller is 636.


Top
 Profile  
 
 Post subject: Re: PCB BAD WD1200UE-00KVT0. OTHER TVS PROBLEM?
PostPosted: September 28th, 2009, 9:56 
Offline

Joined: February 17th, 2009, 13:01
Posts: 111
Location: Bogotá, D.C.
mmm.. its not PCB for this HDD?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 73 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group