All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 181 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next
Author Message
 Post subject: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 11:26 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
Hello, my hdd WDC WD20EARS-00MVWB0 Saddle_Back Gen 6 (Royl) has module 006F corrupted (version AOZ30000).
Firmware is 25.12E
Someone may upload 006F module in RPM format or all firmware please?

Thank you.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 11:42 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2776
Location: Kuwait
you don`t need it at all

in fact even NEW DRIVES comes with bad 6F

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 11:57 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
einstein9 wrote:
you don`t need it at all

in fact even NEW DRIVES comes with bad 6F


What :shock:
New drives with bad 6F ? :?
Do you mean that this module is not important?

So why my drive is very very slow and about impossible to clone?
MHDD sector scan interrupts every few seconds, but no bad sector are found, if i push the right arrow for sector jump it continues to scan but after few seconds stops again, and so on...

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:16 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2776
Location: Kuwait
could be FW
could be heads
could be anything else

BUT NOT 6F

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:23 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
If is fw issue i may need to flash it, right?
If so, it's possible to upload it so i can try to flash it?

If is a head issue, may help to depop the damaged one?

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:39 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2776
Location: Kuwait
all depends, on proper diagnose
cannot tell or guess

but should be 1 of those 3 options i suggested

good luck

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:44 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
3th option you wrote "could be anything else".
Can you explain it better please?

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:46 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 11038
Location: Portugal
I would go for bad head.
One head might be damaged.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:46 
Offline
User avatar

Joined: June 23rd, 2008, 11:26
Posts: 501
Location: Austin, TX
You can try the Solve "slow response" option in the WD utility

But Einstein is correct...

It could be Bad heads, a Faulty board,

Do a head test

But since all the modules are clean i would suspect it is the slow issue. second is a weak head


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:47 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
How can i find which head is damaged?

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:48 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
Cleanroom wrote:
You can try the Solve "slow response" option in the WD utility

But Einstein is correct...

It could be Bad heads, a Faulty board,

Do a head test

But since all the modules are clean i would suspect it is the slow issue. second is a weak head


No faulty board, i changed it and did rom transfer, same issue...

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:51 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 11038
Location: Portugal
Also check defect lists, like g and p list as those have influence on translator.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 12:55 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
I tried also to reset G-list (which had 41 reallocated sectors) and smart, but nothing has changed.

Attachment:
g-list1.JPG
g-list1.JPG [ 86.96 KiB | Viewed 15564 times ]
Attachment:
g-list2.JPG
g-list2.JPG [ 86.67 KiB | Viewed 15564 times ]

Attachment:
smart.JPG
smart.JPG [ 116.29 KiB | Viewed 15564 times ]

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 13:01 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 11038
Location: Portugal
Test heads.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 13:05 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
AMNF is always on when i start WDR

Defect P-list
Attachment:
Defects.ini [45.19 KiB]
Downloaded 647 times

Attachment:
Defect.JPG
Defect.JPG [ 223.37 KiB | Viewed 15560 times ]


Attachment:
heads.JPG
heads.JPG [ 34.59 KiB | Viewed 15555 times ]


IBI Common Log and SS defecs chart:
Attachment:
IBI Common Log and SS defecs chart.JPG
IBI Common Log and SS defecs chart.JPG [ 115.3 KiB | Viewed 15548 times ]


Attachments:
heads.JPG
heads.JPG [ 37.4 KiB | Viewed 15557 times ]

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Last edited by michael chiklis on April 9th, 2013, 13:19, edited 1 time in total.
Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 13:17 
Offline
User avatar

Joined: June 23rd, 2008, 11:26
Posts: 501
Location: Austin, TX
michael chiklis wrote:
How can i find which head is damaged?


there is a head test in the wd utility. and so is the solve slows solution.

edit - i see your head test now...

try the solve slow solution


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 13:20 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
Cleanroom wrote:
michael chiklis wrote:
How can i find which head is damaged?


there is a head test in the wd utility. and so is the solve slows solution.

edit - i see your head test now...

try the solve slow solution


I should install this?
http://support.wdc.com/product/download ... 71&lang=it

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 13:49 
Offline
User avatar

Joined: June 23rd, 2008, 11:26
Posts: 501
Location: Austin, TX
michael chiklis wrote:
Cleanroom wrote:
michael chiklis wrote:
How can i find which head is damaged?


there is a head test in the wd utility. and so is the solve slows solution.

edit - i see your head test now...

try the solve slow solution


I should install this?
http://support.wdc.com/product/download ... 71&lang=it


no...

in PC-3000 there is a head test, but you already posted a test that shows as good. ( thow it may be wrong)

In the PC-3000, under the WD Utlility Under one of the menu's there is a Solve"SLow responding" SOlution. try that.

that is if you have a pretty recent update of the pc-3000


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 13:58 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1562
Location: Italy
unfortunately i don't have pc3000 :cry:

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E
PostPosted: April 9th, 2013, 14:37 
Offline
User avatar

Joined: June 23rd, 2008, 11:26
Posts: 501
Location: Austin, TX
um....

ok...

you subject title of the thread states "Need firmware for pc3k WDC WD20EARS-00MVWB0 25.12E" .


so we would assume you had one.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 181 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: mayanksharmaggc and 96 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group