Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 5 of 50
  [ 982 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7, 8 ... 50  Next
  Previous topic | Next topic 
Author Message
Luda
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: December 23rd, 2009, 8:48 
Offline

Joined: November 17th, 2009, 15:57
Posts: 7
Location: Czech Republic
Please post manual how to use ZU.
There is many info but not in english.
How run ZU? under Win98? installed? or Boot CD?

Thanks
Top
 Profile  
 
Luda
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: December 23rd, 2009, 10:15 
Offline

Joined: November 17th, 2009, 15:57
Posts: 7
Location: Czech Republic
hdd07 wrote:
Hi Luda,
Have you got the 42.bin?
Have you run all the 3 dump scripts?
Have you tried the Zu if you just want to remove the password?
Good Luck.
:lol:

Luda wrote:
M0RBI0US wrote:
hi i was stuck with the same problem which i solve on a WDC2500bevt
just a quick list of master pwd i found on my travels

WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCW <----THIS ONE WORKED FOR ME
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
&'()*.WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
h2oinsyde <-----for acer drive(but not mine)

if none of the above work then the fun begins
first download MHDD boot disk (google for it)
copy the unzipped files i put up on to a usb stick and plug in
remove all drives except locked one
boot the cd and press F5 (safe mode)
type 'c:' to get to the contents of usb drive
then type MHDD to run the program on the usb not the cd as that is wrong version
in MHDD (select drive this might take a little bit of getting use to!)
run the script by typing ".dump" or ".dump2" (two different scripts)
the script will run and return "DONE"
read the 22.bin file if DUMP script run ok with a hex editor
and 42.bin if DUMP2 script run ok with a hex editor
also read all other posts for more info
hope this helps
and a great big thanks too all who posted and helped me save 8 months worth of HNC elec engineering work thanks!
Nirvanowiec, a big xtra thanx for the script i used....
Attachment:
MHDD.zip



I need help, if I do this, in MHDD I have errors: ERROR: No DRQ
And there are no new bin files on flash drive :(
Where will be problem?
There is screen from MHDD:
Thanks


[PRE]
51 ERR INDX CORR DREQ DRSC WRFT DRDY BUSY AMNF T0NF ABRT IDNF UNCR BBK 04
[ Drive parameters - PRESS F2 to DETECT ] [ Current position ]
LINE 5: REGS = $D6 $01 $BE $4F $C2 $A0 $B0
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
LINE 8: SECTORSFROM = CS.BIN
LINE 9: REGS = $D5 $01 $BF $4F $C2 $A0 $B0
LINE 10: WAITNBSY
LINE 11: CHECKDRQ
ERROR: No DRQ
MHDD>.dump2
MHDD ATA/SCSI TERMINAL v2.1
Script: DUMP2
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
LINE 1: RESET
LINE 2: WAITNBSY
LINE 3: REGS = $57 $44 $43 $00 $00 $A0 $8A
LINE 4: WAITNBSY
LINE 5: REGS = $00 $02 $00 $00 $0F $E0 $21
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
ERROR: No DRQ


| Exit : <ALT+X> | 22:35:56
[/PRE]



Yes, I run all scripts, but the same problem, DRQ Error. HDD was connected on both SATA and ATA ports, but always Error NoDRQ
What Can I do?
And I dont know how to run ZU
Thanks for help
Top
 Profile  
 
Luda
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: December 23rd, 2009, 10:23 
Offline

Joined: November 17th, 2009, 15:57
Posts: 7
Location: Czech Republic
M0RBI0US wrote:
when MHDD runs the script it will not make a new .bin file it will output to the 22 or 42 bin files so that the script does not have to create the output file (if it can.?) these then will contain the dump from the drive rom...
cs.bin contains the regs(registers) to be output by the script where they came from beats me....?and will be different for each make and model of drives
thanxs again to all in this forum with that kind of info..xXx

dump48 script i believe now to be completly useless as that was written for if the drive was in 48 bit mode i think but was never tested????



I tested it with and without bin files on flash.
But NoDRQ error still.
What is DRQ error?
Top
 Profile  
 
ttusa
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: January 24th, 2010, 14:02 
Offline

Joined: January 22nd, 2010, 4:02
Posts: 2
Location: Finland
Hi there,
I have locked WD2500BEVS-22USTO and I need help with 22.bin-file, because I can't find the password. I have tried to find the answer from other threads how to read the 22.bin-file (made with "M0RBI0US" MHDD insructions), but I don't understand where password starts and ends. If someone would tell me password start and end offset from my 22.bin-file I would be pleased. Thanks.


Attachments:
22 bin.JPG
22 bin.JPG [ 131.96 KiB | Viewed 41466 times ]
Top
 Profile  
 
kricker
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: January 24th, 2010, 15:38 
Offline

Joined: December 18th, 2009, 17:55
Posts: 9
Location: United States
You'll need to follow these instructions for entering the password into mhdd:
is0-mick wrote:
I actually just figured out a way to do it with MHDD.

If you convert the hex into decimal

You can then hold down the ALT-GR key, then on the numeric keypad type the decimal code (3 digits pad with 00s), and it will give you the asc character for that number :)

so the master password was:
14 24 16 17 2D 31 05 02 (hex)

which decimal is
20 36 22 23 45 49 5 2

so I held alt-gr and typed 020 036 022 023 045 049 005 002 (you need to release the alt-gr key after each 3 digits typed)

drive unlocked!
Mick
Replacing of course your password. You can use any online hex to dec converter. Just make sure you convert each double digit hex value on its own. If you try to type in the whole string of numbers at once, you'll get the wrong result.

Your password in hex may be:
32 00 20 00 55 ff 00 01

In decimal:
050 000 032 000 085 255 000 001
Top
 Profile  
 
ttusa
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: January 24th, 2010, 19:20 
Offline

Joined: January 22nd, 2010, 4:02
Posts: 2
Location: Finland
"Your password in hex may be:
32 00 20 00 55 ff 00 01

In decimal:
050 000 032 000 085 255 000 001"

Not right one, I tried to unlock as user and master but doesn't work....
Top
 Profile  
 
Lu5ck
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 1st, 2010, 4:57 
Offline

Joined: February 1st, 2010, 4:51
Posts: 1
Location: Singapore
Hi,

I followed the instructions and dump out 21 and 22 but what I got don't see to be the same.....


Attachments:
untitled.JPG
untitled.JPG [ 133.24 KiB | Viewed 41371 times ]
Top
 Profile  
 
hemund
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 7th, 2010, 19:58 
Offline

Joined: February 7th, 2010, 18:52
Posts: 2
Location: BRAZIL
hi guys
For unknown reason I got my hdd wd2500bevt locked with a password at maximum security
I've read the forum and tryed run the script below in MHDD 4.5 but it gives me
"unknown command" and I don't know what I'm doing wrong.
I don't care about data in disk, just want my hardware back.
Can anyone PLEASE point out my mistake? Thanks.


; rm modul id 42
reset
waitnbsy
regs = $57 $44 $43 $00 $00 $a0 $8a
waitnbsy
regs = $00 $02 $00 $00 $0F $E0 $21
waitnbsy
checkdrq
sectorsto = 42.bin
; End.
:)
Top
 Profile  
 
abispac
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 7th, 2010, 20:39 
Offline

Joined: February 7th, 2010, 20:03
Posts: 15
Location: el paso tx
so erasing my post means i should hang in here? if thats the case, i just wanna know how to create a script that works in Mhhd , because the ones im using MHHD tells me are the wrong version. i have a xbox locked drive and the mster passwords dont work, im using MHHD tha comes in hirens boot cd. everithing seems ok but i canot use any scripts due to them being in the wrong version, i dont wanna bother until i get the scripts running, thanks for any help. and if you earse a post , please be kind and send a message. Thanks :D
Top
 Profile  
 
phishin_ca
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 7th, 2010, 20:47 
Offline

Joined: November 11th, 2007, 22:44
Posts: 168
Abispac, you need to get the right version of MHDD. Do a search and you will find what you need.
Top
 Profile  
 
abispac
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 8th, 2010, 1:04 
Offline

Joined: February 7th, 2010, 20:03
Posts: 15
Location: el paso tx
phishin_ca wrote:
Abispac, you need to get the right version of MHDD. Do a search and you will find what you need.

is it 4.5? will the scripts work on this version? thats what i read...so i got me a hex editor, saved files and im a test them all.I also wonder if i put the scripts in the scripts folder or the batch folder? hope it works this time.
Top
 Profile  
 
abispac
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 8th, 2010, 15:34 
Offline

Joined: February 7th, 2010, 20:03
Posts: 15
Location: el paso tx
ok i manage to run the script but i get drive reports error. any solutions for this?
Top
 Profile  
 
abispac
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 8th, 2010, 16:04 
Offline

Joined: February 7th, 2010, 20:03
Posts: 15
Location: el paso tx
abispac wrote:
ok i manage to run the script but i get drive reports error. any solutions for this?

i created cs.bin with a hex editor. if tha helps
Top
 Profile  
 
abispac
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 8th, 2010, 18:16 
Offline

Joined: February 7th, 2010, 20:03
Posts: 15
Location: el paso tx
either i dont have enough privileges cus i dont see the edit button, anyway i manage to create a 22.bin file but since in running out of a cd im not able to save the file, so i wrothe the numbers with a hex editor, on one line i get 01-53-7c-42-4c-4e-50-4d-4d-32-48-38-43-4b-52-4c-56-42-4b-45-55-7c and in another line i get 00-01-07-00-3e-a8-00-42-dc-3e-24-f5-c5-6a-45-69-01-e6-0d-78-08-c9-86-f2 wich look liwe weird characters, can anyone help me to figure the password, thanks for any help.


Attachments:
2.txt [32 Bytes]
Downloaded 1610 times
1.txt [24 Bytes]
Downloaded 1466 times
Top
 Profile  
 
abispac
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 8th, 2010, 19:01 
Offline

Joined: February 7th, 2010, 20:03
Posts: 15
Location: el paso tx
Heres a pic of the screen, can anyone help me guess what py password is?
Image
Top
 Profile  
 
abispac
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 8th, 2010, 22:04 
Offline

Joined: February 7th, 2010, 20:03
Posts: 15
Location: el paso tx
SUCKY picture , here are better ones, i know somewhere betewn lines 130 to 160 its the password, just seem to get it to work, please just help me find it, thanks for any help.
Image
Image
Image
Image
Top
 Profile  
 
abispac
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 8th, 2010, 22:24 
Offline

Joined: February 7th, 2010, 20:03
Posts: 15
Location: el paso tx
SUCKY picture , here are better ones, i know somewhere betewn lines 130 to 160 its the password, just seem to get it to work, please just help me find it, thanks for any help.
Image
Image
Image
Image
Top
 Profile  
 
hemund
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 9th, 2010, 11:10 
Offline

Joined: February 7th, 2010, 18:52
Posts: 2
Location: BRAZIL
hi guys
Im stuck at the same point as Luda -> No DRQ error
anybody has manual for 'ATAPWD' and/or 'ZU'

can an ENHANCED SECURITY ERASE free my hdd?
can anyone tell me how to do it?
thanks
Top
 Profile  
 
igscomp
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 9th, 2010, 16:34 
Offline

Joined: February 9th, 2010, 16:28
Posts: 3
Location: Spain
Hi, i obtain this 22.bin but i don't know where is the password, and if it is master o user password. Can any one help me? Thanks!!


Attachments:
File comment: 22.bin
22.BIN.txt [512 Bytes]
Downloaded 2233 times
Top
 Profile  
 
abispac
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: February 9th, 2010, 22:45 
Offline

Joined: February 7th, 2010, 20:03
Posts: 15
Location: el paso tx
help anyone?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 5 of 50
  [ 982 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7, 8 ... 50  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group