April 29th, 2018, 12:34
April 29th, 2018, 13:01
April 30th, 2018, 7:10
April 30th, 2018, 10:56
rogfanther wrote:First, try to remember the password. If you remember it should be something, maybe try it in all caps or no-caps. It is possible that when entering the password in bios you inadvertently left the keyboard capslock activated.
If not remembering, then take it to a professional . At this stage with only the password it should be cheap.
April 30th, 2018, 10:58
dick wrote:Here is an old thread explaining how to do it before newer tools were developed.
https://forum.hddguru.com/viewtopic.php ... r+Password
Its like going back in time.
April 30th, 2018, 11:05
Spildit wrote:Oh ...
Regards.
May 12th, 2018, 13:15
Spildit wrote:The way ZU works on ST-10 drives is simple, it will issue an ATA vendor specific command that will try to retrieve the user password from the drive and if it can do so it will use that password to unlock the drive using the standard ATA commands to do so. If ZU does unlock your drive there will be no data loss. ZU unlock the drive with the same password that it was set on it so it would be like having the correct password.
May 16th, 2018, 17:09
May 25th, 2018, 9:57
3.06 st950814A
UNLOCK NOT DONE
May 25th, 2018, 11:44
May 26th, 2018, 17:02
November 24th, 2018, 18:23
Spildit wrote:Well ... Small correction now that I did re-read this thread...
On some ST-10 drives ZU can only get the password IF the original MASTER password was not changed ! Otherwise the VSC (ATA) used by ZU will not work ...
November 25th, 2018, 6:53
Spildit wrote:Just use the TTL to read Vendor and get the password. Or use manual method ... Or try to use ZOC script ... Many options there ... Read the first posts on this thread.
March 26th, 2019, 8:01
March 26th, 2019, 8:11
March 27th, 2019, 5:11
Spildit wrote:Just send me the drive in for unlocking ... Should be faster ...
This thread is already one year old ...
Spildit wrote:You can use some other type of "power" like a PC-3000 2.5 IDE adaptor if you don't want to play with HDD pins ...
Powered by phpBB © phpBB Group.