Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
July 26th, 2005, 3:19
CAN ANY ONE HELP ME HOW TO SET Western Digital WD400 JUMPER TO SAFE MODE.
HELP PLEASE
July 26th, 2005, 10:01
Its easy only you need to Put three jumper on PCB
1. in CS
2. in Master
3. in Slave
This is all and connect only the PCB without HDA
Powered by phpBB © phpBB Group.