Unlocking ATA Password for Western Digital

[dick]

Thanks Nirvanowiec !!!

[Ombladon]

unlock WD (WDC,MARVEL,ROYL) ->
http://ng.uber.lt/#comp.hardware/415673 ... hdd-pamiro
http://yura.projektas.lt/files/wd/zu.zip

zu gives me a error:

ERR:51E0EB14000304 CMD:0000000000E0EC
NO DRQ!

doesnt fix my problem

[BlackST]

In fact the problem is elsewhere....

[Nirvanowiec]

Patient: I drank a Valium zymosis he does not help. Doctor: What's the problem then? Patient: Yes diarrhea for 2 days

[Ombladon]

Patient: I drank a Valium zymosis he does not help. Doctor: What's the problem then? Patient: Yes diarrhea for 2 days

is this a joke? am i suppose to laugh?

guess i forgot.

a/w the program worked, the problem was i didnt have a intel chipset when i tryed to use zu

[dx2]

Please tell me where from these regs, how to get it from hd ?

regs = $57 $44 $43 $00 $00 $a0 $8a
waitnbsy
regs = $00 $02 $00 $00 $0F $E0 $21

[ohm_boy]

The script ran fine, just can't figure out what the master or user password is. Can anyone help?

Thanks!

22.BIN.txt

(512 Bytes) Downloaded 2600 times

[M0RBI0US]

hi i was stuck with the same problem which i solve on a WDC2500bevt
just a quick list of master pwd i found on my travels

WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCW <----THIS ONE WORKED FOR ME
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
&'()*.WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
h2oinsyde <-----for acer drive(but not mine)

if none of the above work then the fun begins
first download MHDD boot disk (google for it)
copy the unzipped files i put up on to a usb stick and plug in
remove all drives except locked one
boot the cd and press F5 (safe mode)
type 'c:' to get to the contents of usb drive
then type MHDD to run the program on the usb not the cd as that is wrong version
in MHDD (select drive this might take a little bit of getting use to!)
run the script by typing ".dump" or ".dump2" (two different scripts)
the script will run and return "DONE"
read the 22.bin file if DUMP script run ok with a hex editor
and 42.bin if DUMP2 script run ok with a hex editor
also read all other posts for more info
hope this helps
and a great big thanks too all who posted and helped me save 8 months worth of HNC elec engineering work thanks!
Nirvanowiec, a big xtra thanx for the script i used....

MHDD.zip

(127.51 KiB) Downloaded 54045 times

[M0RBI0US]

the boot Disk i used was
magic boot disk v2 with MHDD 4.6
which does not include the terminal and does not run scripts
So my download contains 4.5 to put on usb stick

enjoy

big up this forum total life savers.........................

[Corpo]

ZU works very well! Thank you
You saved my day (damn crappy hardware devices which secure erase with master password ... when the drive takes too long to complete, it stays locked )

[z007]

ZU can clear user password only ?

can it clear master ata password ?

[z007]

Look at EC command - even hdd passport was not read. Software cannot work in this case, as it cannot make you a sandwitch.
http://yura.projektas.lt/files/wd/royl_mhdd.html - first movie for disbelievers - works 100%.

hi Nirvanowiec when i use hddl.exe to password protect it give me an error what is the reason?
in hd info my HDD infomation is good

[Luda]

Heloo,
I read bin from my WD5000BEVT.
But I Cannot see code from bin. Can you help me what is code? Thanks

Attachments

22.rar

There is in bin format

(328 Bytes) Downloaded 1379 times

[Luda]

hi i was stuck with the same problem which i solve on a WDC2500bevt
just a quick list of master pwd i found on my travels

WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCW <----THIS ONE WORKED FOR ME
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
&'()*.WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
h2oinsyde <-----for acer drive(but not mine)

if none of the above work then the fun begins
first download MHDD boot disk (google for it)
copy the unzipped files i put up on to a usb stick and plug in
remove all drives except locked one
boot the cd and press F5 (safe mode)
type 'c:' to get to the contents of usb drive
then type MHDD to run the program on the usb not the cd as that is wrong version
in MHDD (select drive this might take a little bit of getting use to!)
run the script by typing ".dump" or ".dump2" (two different scripts)
the script will run and return "DONE"
read the 22.bin file if DUMP script run ok with a hex editor
and 42.bin if DUMP2 script run ok with a hex editor
also read all other posts for more info
hope this helps
and a great big thanks too all who posted and helped me save 8 months worth of HNC elec engineering work thanks!
Nirvanowiec, a big xtra thanx for the script i used....

MHDD.zip

I need help, if I do this, in MHDD I have errors: ERROR: No DRQ
And there are no new bin files on flash drive
Where will be problem?
There is screen from MHDD:
Thanks


[PRE]
51 ERR INDX CORR DREQ DRSC WRFT DRDY BUSY AMNF T0NF ABRT IDNF UNCR BBK 04
[ Drive parameters - PRESS F2 to DETECT ] [ Current position ]
LINE 5: REGS = $D6 $01 $BE $4F $C2 $A0 $B0
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
LINE 8: SECTORSFROM = CS.BIN
LINE 9: REGS = $D5 $01 $BF $4F $C2 $A0 $B0
LINE 10: WAITNBSY
LINE 11: CHECKDRQ
ERROR: No DRQ
MHDD>.dump2
MHDD ATA/SCSI TERMINAL v2.1
Script: DUMP2
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
LINE 1: RESET
LINE 2: WAITNBSY
LINE 3: REGS = $57 $44 $43 $00 $00 $A0 $8A
LINE 4: WAITNBSY
LINE 5: REGS = $00 $02 $00 $00 $0F $E0 $21
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
ERROR: No DRQ


| Exit : <ALT+X> | 22:35:56
[/PRE]

[hdd07]

Hi Luda,
Have you got the 42.bin?
Have you run all the 3 dump scripts?
Have you tried the Zu if you just want to remove the password?
Good Luck.

hi i was stuck with the same problem which i solve on a WDC2500bevt
just a quick list of master pwd i found on my travels

WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCW <----THIS ONE WORKED FOR ME
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
&'()*.WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
h2oinsyde <-----for acer drive(but not mine)

if none of the above work then the fun begins
first download MHDD boot disk (google for it)
copy the unzipped files i put up on to a usb stick and plug in
remove all drives except locked one
boot the cd and press F5 (safe mode)
type 'c:' to get to the contents of usb drive
then type MHDD to run the program on the usb not the cd as that is wrong version
in MHDD (select drive this might take a little bit of getting use to!)
run the script by typing ".dump" or ".dump2" (two different scripts)
the script will run and return "DONE"
read the 22.bin file if DUMP script run ok with a hex editor
and 42.bin if DUMP2 script run ok with a hex editor
also read all other posts for more info
hope this helps
and a great big thanks too all who posted and helped me save 8 months worth of HNC elec engineering work thanks!
Nirvanowiec, a big xtra thanx for the script i used....

MHDD.zip

I need help, if I do this, in MHDD I have errors: ERROR: No DRQ
And there are no new bin files on flash drive
Where will be problem?
There is screen from MHDD:
Thanks


[PRE]
51 ERR INDX CORR DREQ DRSC WRFT DRDY BUSY AMNF T0NF ABRT IDNF UNCR BBK 04
[ Drive parameters - PRESS F2 to DETECT ] [ Current position ]
LINE 5: REGS = $D6 $01 $BE $4F $C2 $A0 $B0
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
LINE 8: SECTORSFROM = CS.BIN
LINE 9: REGS = $D5 $01 $BF $4F $C2 $A0 $B0
LINE 10: WAITNBSY
LINE 11: CHECKDRQ
ERROR: No DRQ
MHDD>.dump2
MHDD ATA/SCSI TERMINAL v2.1
Script: DUMP2
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
LINE 1: RESET
LINE 2: WAITNBSY
LINE 3: REGS = $57 $44 $43 $00 $00 $A0 $8A
LINE 4: WAITNBSY
LINE 5: REGS = $00 $02 $00 $00 $0F $E0 $21
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
ERROR: No DRQ


| Exit : <ALT+X> | 22:35:56
[/PRE]

[M0RBI0US]

when MHDD runs the script it will not make a new .bin file it will output to the 22 or 42 bin files so that the script does not have to create the output file (if it can.?) these then will contain the dump from the drive rom...
cs.bin contains the regs(registers) to be output by the script where they came from beats me....?and will be different for each make and model of drives
thanxs again to all in this forum with that kind of info..xXx

dump48 script i believe now to be completly useless as that was written for if the drive was in 48 bit mode i think but was never tested????

[kricker]

When running MHDD, I can not see the drive that has the lock password. All I see listed is the CD/DVD drive. Is there a trick to get the locked drive to show up in mhdd? I was following the directions posted by M0RBI0US above.

I also tried zu, though I am not quite sure how to use it. I launched it using zu /p and after some time I get back 'drive is not ready'.

[Luda]

Please post manual how to use ZU.
There is many info but not in english.
How run ZU? under Win98? installed? or Boot CD?

Thanks

[Luda]

Hi Luda,
Have you got the 42.bin?
Have you run all the 3 dump scripts?
Have you tried the Zu if you just want to remove the password?
Good Luck.

hi i was stuck with the same problem which i solve on a WDC2500bevt
just a quick list of master pwd i found on my travels

WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCW <----THIS ONE WORKED FOR ME
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
&'()*.WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
h2oinsyde <-----for acer drive(but not mine)

if none of the above work then the fun begins
first download MHDD boot disk (google for it)
copy the unzipped files i put up on to a usb stick and plug in
remove all drives except locked one
boot the cd and press F5 (safe mode)
type 'c:' to get to the contents of usb drive
then type MHDD to run the program on the usb not the cd as that is wrong version
in MHDD (select drive this might take a little bit of getting use to!)
run the script by typing ".dump" or ".dump2" (two different scripts)
the script will run and return "DONE"
read the 22.bin file if DUMP script run ok with a hex editor
and 42.bin if DUMP2 script run ok with a hex editor
also read all other posts for more info
hope this helps
and a great big thanks too all who posted and helped me save 8 months worth of HNC elec engineering work thanks!
Nirvanowiec, a big xtra thanx for the script i used....

MHDD.zip

I need help, if I do this, in MHDD I have errors: ERROR: No DRQ
And there are no new bin files on flash drive
Where will be problem?
There is screen from MHDD:
Thanks


[PRE]
51 ERR INDX CORR DREQ DRSC WRFT DRDY BUSY AMNF T0NF ABRT IDNF UNCR BBK 04
[ Drive parameters - PRESS F2 to DETECT ] [ Current position ]
LINE 5: REGS = $D6 $01 $BE $4F $C2 $A0 $B0
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
LINE 8: SECTORSFROM = CS.BIN
LINE 9: REGS = $D5 $01 $BF $4F $C2 $A0 $B0
LINE 10: WAITNBSY
LINE 11: CHECKDRQ
ERROR: No DRQ
MHDD>.dump2
MHDD ATA/SCSI TERMINAL v2.1
Script: DUMP2
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
LINE 1: RESET
LINE 2: WAITNBSY
LINE 3: REGS = $57 $44 $43 $00 $00 $A0 $8A
LINE 4: WAITNBSY
LINE 5: REGS = $00 $02 $00 $00 $0F $E0 $21
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
ERROR: No DRQ


| Exit : <ALT+X> | 22:35:56
[/PRE]

Yes, I run all scripts, but the same problem, DRQ Error. HDD was connected on both SATA and ATA ports, but always Error NoDRQ
What Can I do?
And I dont know how to run ZU
Thanks for help

[Luda]

when MHDD runs the script it will not make a new .bin file it will output to the 22 or 42 bin files so that the script does not have to create the output file (if it can.?) these then will contain the dump from the drive rom...
cs.bin contains the regs(registers) to be output by the script where they came from beats me....?and will be different for each make and model of drives
thanxs again to all in this forum with that kind of info..xXx

dump48 script i believe now to be completly useless as that was written for if the drive was in 48 bit mode i think but was never tested????

I tested it with and without bin files on flash.
But NoDRQ error still.
What is DRQ error?