December 6th, 2012, 3:49
December 16th, 2012, 14:44
December 17th, 2012, 1:17
justin_123 wrote:thanks alot
but i want explaining about how to connect pcb with serial port ?
December 21st, 2012, 10:37
December 21st, 2012, 11:34
December 21st, 2012, 12:41
December 21st, 2012, 13:27
Doomer wrote:Here is what he's saying
1. Take WD PCB(ARM based) that has erased or incompatible ROM image (bricked PCB)
2. Connect serial port as shown
3. Short some magic pins to start X-Modem sequence in MCU boot code(E112 and 3.3V for PCB 13xx, 1335 for example). The number is etched on PCB as 2060-701335-xxx
4. Select correct ROM image file and flash it to the drive with the program. Program will use special loaders (called EraseL.dll, SystemL.dll) to do so
5. Per my understanding, provided utility supports only 128KB flash files (external flash chips). For 192KB flash the program will look for Erase.dll and System.dll files that are not provided, thus will not work with those.
December 22nd, 2012, 11:07
einstein9 wrote:Doomer wrote:Here is what he's saying
1. Take WD PCB(ARM based) that has erased or incompatible ROM image (bricked PCB)
2. Connect serial port as shown
3. Short some magic pins to start X-Modem sequence in MCU boot code(E112 and 3.3V for PCB 13xx, 1335 for example). The number is etched on PCB as 2060-701335-xxx
4. Select correct ROM image file and flash it to the drive with the program. Program will use special loaders (called EraseL.dll, SystemL.dll) to do so
5. Per my understanding, provided utility supports only 128KB flash files (external flash chips). For 192KB flash the program will look for Erase.dll and System.dll files that are not provided, thus will not work with those.
Agree with you here
and wanted to add: There are many ROUTES to the SAME destination
and 4 sure, this is one of them.
but @ the end of this, something good came up here
December 22nd, 2012, 11:10
Doomer wrote:Here is what he's saying
1. Take WD PCB(ARM based) that has erased or incompatible ROM image (bricked PCB)
2. Connect serial port as shown
3. Short some magic pins to start X-Modem sequence in MCU boot code(E112 and 3.3V for PCB 13xx, 1335 for example). The number is etched on PCB as 2060-701335-xxx
4. Select correct ROM image file and flash it to the drive with the program. Program will use special loaders (called EraseL.dll, SystemL.dll) to do so
5. Per my understanding, provided utility supports only 128KB flash files (external flash chips). For 192KB flash the program will look for Erase.dll and System.dll files that are not provided, thus will not work with those.
December 22nd, 2012, 22:01
December 23rd, 2012, 2:55
thatdellguy wrote:I tried it on a ATLANTIS PATA with erased ROM (thanks to SD tools) and it didnt work.
December 23rd, 2012, 20:43
Short some magic pins to start X-Modem
December 23rd, 2012, 22:57
December 24th, 2012, 4:01
December 24th, 2012, 4:39
December 28th, 2012, 15:33
January 18th, 2013, 10:38
January 19th, 2013, 1:45
January 19th, 2013, 1:46
ahmedshref wrote:we need aphoto to com plese
January 19th, 2013, 2:13
Powered by phpBB © phpBB Group.