Fun questions. :)

[BlackST]

[entering MACHO mode]
Usually women can't change a bulb, since when are them going around with torx screwdrivers instead of lipsticks in their bags?
[back to normal mode]

[N.C.]

I have one problem now....

My new quantum bigfoot not fits into my stock's bracket.

Size incompatible.

[hddguy]

Maybe you need a bigger shoe

[prodata]

Since Corner can not run more faster and stuck in its Corner.the championship must become the Property of MEdalist.
and Finally Quantum also can not stand no more and Give ALL his life to DIAMONDMAX.
To show its powerfull, Medalist changed itself to be Come More powerfull called BARRACUDA. and Now Barracuda become More
powerfull caused On his hand wearing a shining DIAMONDXXX

[N.C.]

If some company placed the platter upside down in the HDA, can i read the data back with reversing the rotation with swapping the spindle's wires + modify the headmap?

(the answer is :no)

Janos

[N.C.]

http://www.youtube.com/watch?v=_y36fG2Oba0

[guru]

Hello,

I have replaced my platters twice and also changed the HDA 3 times... Now the drive is working but I cannot see my data ;o)

[N.C.]

Gurus, i have one question for you (except BlackST. )

I have one SP0802N with 2 head.
The H0 is dead.

After i read out the H1 side, can i do the following steps to read out the other side:

1. flip the platter upside down
2. cross the spindle's 2 wires to reverse the rotation
3. rewire the 2 MR sensors in the MHA. (H1 to the H0's input pins)
4. read the H0's side with H1.

Is there a way to do that?
Somebody know the correct answer?

Regards,
Janos

[guru]

in the old days you could happily re-wire conner drives as an example

for your question

1. flip the platter upside down
2. cross the spindle's 2 wires to reverse the rotation
3. rewire the 2 MR sensors in the MHA. (H1 to the H0's input pins)
4. read the H0's side with H1.

2:Easy don't need step two, you can just read the drive in reverse mode ;o)
3: Take the head stack and turn it upside down. No wire needed :O)

[N.C.]

in the old days you could happily re-wire conner drives as an example

for your question

1. flip the platter upside down
2. cross the spindle's 2 wires to reverse the rotation
3. rewire the 2 MR sensors in the MHA. (H1 to the H0's input pins)
4. read the H0's side with H1.

2:Easy don't need step two, you can just read the drive in reverse mode ;o)
3: Take the head stack and turn it upside down. No wire needed :O)

This was a really ontopic answer.

Anybody have another idea, opinion?

[BlackST]

Yes and if there are movies or MP3s on the drive you'll hear/see it in reverse play ? What about a porn movie ?

AHAHAHAHA LOOOOOL (sorry couldn't resist....)

[N.C.]

[HardDiskBug]

To be very frankly, your drive can be recovered, but as blackST said, your mp3s or movies may run backward..

also, you will get your jpegs upside down. (I.E. face down to ground and legs hanging in the air)

[N.C.]

To be very frankly, your drive can be recovered, but as blackST said, your mp3s or movies may run backward..

also, you will get your jpegs upside down. (I.E. face down to ground and legs hanging in the air)

HardDiskBug, my case is under recovery, now i am doing the manually picture rotating/mirroring.

[guru]

with p0rn movie its better to watch it in reverse. thats where the "Money shot" is ;o) LOOOOL

[HardDiskBug]

Well, as far as pr0n is concerned, I do not see any difference, wheather to be watched it forward or reverse...

IMHO

[N.C.]

Well, as far as pr0n is concerned, I do not see any difference, wheather to be watched it forward or reverse...

IMHO

The begginning, and the end is a little different, but in the middle is the same.

[hddguy]

Yes and if there are movies or MP3s on the drive you'll hear/see it in reverse play ? What about a porn movie ?

You do like your porn movies, I see several of your topics referring to them!!

You have a top 20 of must see movies? lol

[poehere]

Can I do hot swap while the drive is running?

I did not see my LBA and went on Internet to download a free software to try and find it and the software did a low level format on my LBA and now my LBA is still showing 0 can you recover my drive?

[Russwinters]

That is how perform best platter transplants; while the drive is fully initialized you grab the platters with your bare hands and swap them


You then use the fingers you have left to dial 911 and call for an ambulance.