MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]


Switch to mobile style


Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: ST380011A
PostPosted: March 18th, 2009, 14:39 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Hi to all!
Look

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51

Buzz - Head Mask 0000 - Switch to full int.
Spin Ready
3.54 06-11-03 16:59
(P)PATA Reset

T>/1
1>N 5
Attributes
0000: 0a 00 01 0f 00 3d 39 00 66 3a 01 00 00 00 03 03
0010: 00 60 60 00 00 00 00 00 00 00 04 32 00 63 63 79
0020: 05 00 00 00 00 00 05 33 00 64 64 00 00 00 00 00
0030: 00 00 07 0f 00 54 3c 4b 99 11 12 00 00 00 09 32
0040: 00 5f 5f e5 12 00 00 00 00 00 0a 13 00 64 64 00
0050: 00 00 00 00 00 00 0c 32 00 63 63 2b 07 00 00 00
0060: 00 00 c2 22 00 25 34 25 00 00 00 00 00 00 c3 1a
0070: 00 3c 38 00 66 3a 01 00 00 00 c5 12 00 64 64 00
0080: 00 00 00 00 00 00 c6 10 00 64 64 00 00 00 00 00
0090: 00 00 c7 3e 00 c8 c8 00 00 00 00 00 00 00 c8 00
00a0: 00 64 fd 00 00 00 00 00 00 00 ca 32 00 62 fb 02
00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 13
0170: 03 00 01 00 01 3a 00 00 00 00 00 00 00 00 00 00
0180: 00 00 4c e3 00 00 06 04 04 04 04 04 04 04 04 00
0190: 00 00 00 00 00 00 00 01 12 fc f6 01 00 00 00 00
01a0: 00 00 51 9e e1 88 c9 00 00 00 00 00 00 00 00 00
01b0: 00 00 00 00 12 fc f6 01 00 00 ff ff 00 00 00 00
01c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

1>N 6
Thresholds
0000: 0a 00 01 06 00 00 00 00 00 00 00 00 00 00 03 00
0010: 00 00 00 00 00 00 00 00 00 00 04 14 00 00 00 00
0020: 00 00 00 00 00 00 05 24 00 00 00 00 00 00 00 00
0030: 00 00 07 1e 00 00 00 00 00 00 00 00 00 00 09 00
0040: 00 00 00 00 00 00 00 00 00 00 0a 61 00 00 00 00
0050: 00 00 00 00 00 00 0c 14 00 00 00 00 00 00 00 00
0060: 00 00 c2 00 00 00 00 00 00 00 00 00 00 00 c3 00
0070: 00 00 00 00 00 00 00 00 00 00 c5 00 00 00 00 00
0080: 00 00 00 00 00 00 c6 00 00 00 00 00 00 00 00 00
0090: 00 00 c7 00 00 00 00 00 00 00 00 00 00 00 c8 00
00a0: 00 00 00 00 00 00 00 00 00 00 ca 00 00 00 00 00
00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

1>N 7

Hours LBA R-Theta-Z
AutoRd Err 47 at 00f6ba.00.0104


Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51

Buzz - Head Mask 0000 - Switch to full int.
Spin Ready
3.54 06-11-03 16:59
(P)PATA Reset

CE Log EC=0 Rtype=36 OV=0 STStatus0
AutoRd Err 47 at 00f6ba.00.008b

bad Glist? our head bad? :?

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 19th, 2009, 2:57 
Offline
User avatar

Joined: January 9th, 2007, 11:12
Posts: 410
Location: Romania
Just try an 1>N1 and see what happend....

_________________
www.datasave.ro


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 19th, 2009, 3:41 
Offline

Joined: March 15th, 2005, 12:49
Posts: 36
Location: Владивосток
/T
V4 - G-list

Possibly, many pending.


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 19th, 2009, 8:33 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
ccc wrote:
Just try an 1>N1 and see what happend....


Hi ccc! :mrgreen:
First
Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51

Buzz - Head Mask 0000 - Switch to full int.
Spin Ready
3.54 06-11-03 16:59
(P)PATA Reset

T>/1
1>N 1

Initializing SMART Sectors

clicking and stop!

second
nterface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51

Buzz - Head Mask 0000 - Switch to full int.
Spin Ready
3.54 06-11-03 16:59

T>/1
1>N 1
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
AutoRd Err 43 at 00e330.00.0000
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
AutoRd Err 43 at 00e330.00.0140
smartres.c - ovl L1 failed

Clincking and off!
:?:

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 19th, 2009, 8:54 
Offline
User avatar

Joined: January 9th, 2007, 11:12
Posts: 410
Location: Romania
Possible scratch in SA or bad/weak head 0.....From your first post I see the disk starts correctly...What's happend if you try to read sectors in LBA?....
Rgds

_________________
www.datasave.ro


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 19th, 2009, 10:08 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
ccc wrote:
Possible scratch in SA or bad/weak head 0.....From your first post I see the disk starts correctly...What's happend if you try to read sectors in LBA?....
Rgds


Not read lba
Clicking and off.

Thanks all replys! :!:

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 19th, 2009, 11:16 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Hi to all :D

OPENing HDD I found two platters and three heads, I believe that only platter0 and heads0,1, was used… certain? :?:
:idea:

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 19th, 2009, 11:23 
Offline

Joined: February 1st, 2009, 4:43
Posts: 32
Hi,

ST380011A should be 1 platter and 2 heads....


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 19th, 2009, 11:31 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
netwalker wrote:
Hi,

ST380011A should be 1 platter and 2 heads....

:mrgreen:

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 20th, 2009, 2:37 
Offline

Joined: March 15th, 2005, 12:49
Posts: 36
Location: Владивосток
3.54 06-11-03 16:59
Its kill-head firmware.
Now, you have weak/dirty head 0 too.


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 23rd, 2009, 10:06 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Hi to all!
after cleanness of heads, changed the error… :mrgreen:

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51
Error Reading Reserve Track Defect List

F>

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 23rd, 2009, 10:46 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
your going backwards rather than forwards ;o) :mrgreen:

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 23rd, 2009, 17:15 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
sempre wrote:
Hi to all!
after cleanness of heads, changed the error… :mrgreen:

Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51
Error Reading Reserve Track Defect List

F>


I suggest to try again, the cleaning, if not helps, try to replace the MHA and try with this one....

Janos


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 24th, 2009, 14:50 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
Try changing heads .


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 24th, 2009, 15:43 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
rameez wrote:
Try changing heads .


Yes, not work... :shock:

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 24th, 2009, 15:50 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
sempre wrote:
rameez wrote:
Try changing heads .


Yes, not work... :shock:


Heads, preamp match, are You sure?

The heads died in this hdd, or still works in the donor drive?


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 24th, 2009, 15:54 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
The heads died in this hdd, or still works in the donor drive?

Yes Works in donor...
:roll:

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 24th, 2009, 15:58 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
sempre wrote:
The heads died in this hdd, or still works in the donor drive?

Yes Works in donor...
:roll:


What was the issue with this heads in the patient drive?
(terminal?)


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 24th, 2009, 16:12 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
N.C. wrote:
sempre wrote:
The heads died in this hdd, or still works in the donor drive?

Yes Works in donor...
:roll:


What was the issue with this heads in the patient drive?
(terminal?)


Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51
3.54 06-11-03 16:59
(P)PATA Reset
$Head Mask 0000 - Switch to full int.
Spin Ready
$Switch to full int.
AM Reacquired
$Head Mask 0000 - Head Mask 0000 -
T>Head Mask 0000 - fHead Mask 0000 -
T>Head Mask 0000 -
T>
T>
T>
T>Head Mask 0000 -
T>Head Mask 0000 - Head Mask 0000 -
T>fHead Mask 0000 - f
T>Head Mask 0000 - rHead Mask 0000 -
T>

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: ST380011A
PostPosted: March 24th, 2009, 16:17 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
sempre wrote:
N.C. wrote:
sempre wrote:
The heads died in this hdd, or still works in the donor drive?

Yes Works in donor...
:roll:


What was the issue with this heads in the patient drive?
(terminal?)


Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk M.14 01-16-03 11:51
3.54 06-11-03 16:59
(P)PATA Reset
$Head Mask 0000 - Switch to full int.
Spin Ready
$Switch to full int.
AM Reacquired
$Head Mask 0000 - Head Mask 0000 -
T>Head Mask 0000 - fHead Mask 0000 -
T>Head Mask 0000 -
T>
T>
T>
T>Head Mask 0000 -
T>Head Mask 0000 - Head Mask 0000 -
T>fHead Mask 0000 - f
T>Head Mask 0000 - rHead Mask 0000 -
T>


I think wrong adaptives for this head or not matching heads for this hdd.
The head was clean after you used it in this hdd?
If yes, you shold try another one...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 106 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group