MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
gbulger
 Post subject: WD10EVAS-00D7B1 is there a solution to this?
PostPosted: February 3rd, 2010, 8:16 
Offline

Joined: February 17th, 2006, 11:52
Posts: 34
Location: Mississauga, Ontario, Canada
I have the above drive with what I understand is a common problem. I can read all SA modules, all read heads test good but I can not read any LBAs. I also have the following error, which I understand is common to this type of failure...head0 and head1 both show cylinder -1 with an identical error, all 169 other tracks test good. I was advised by one forum member that tis was a common error and simply rectified...just read the PC3K maual. I did but didn't see anything helpful. Any suggestions? Oh yes, regenerating the translator didn't work.

_________________
Thanks,
GB
Top
 Profile  
 
hddguy
 Post subject: Re: WD10EVAS-00D7B1 is there a solution to this?
PostPosted: February 3rd, 2010, 8:18 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
Translator is fine, just not loaded due to other errors, all mentioned in previous topics...
Top
 Profile  
 
Alexii
 Post subject: Re: WD10EVAS-00D7B1 is there a solution to this?
PostPosted: February 3rd, 2010, 12:55 
Offline

Joined: October 28th, 2009, 14:35
Posts: 775
Location: Toronto
could u link plz?
Top
 Profile  
 
gbulger
 Post subject: Re: WD10EVAS-00D7B1 is there a solution to this?
PostPosted: February 3rd, 2010, 13:51 
Offline

Joined: February 17th, 2006, 11:52
Posts: 34
Location: Mississauga, Ontario, Canada
Yes Please.

_________________
Thanks,
GB
Top
 Profile  
 
pcimage
 Post subject: Re: WD10EVAS-00D7B1 is there a solution to this?
PostPosted: February 3rd, 2010, 13:55 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
If you have genuine PC3K UDMA then you'll have access to the forum, the answers there.

But of course you'll need PC3K UDMA to apply the solution.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Alexii
 Post subject: Re: WD10EVAS-00D7B1 is there a solution to this?
PostPosted: February 3rd, 2010, 14:15 
Offline

Joined: October 28th, 2009, 14:35
Posts: 775
Location: Toronto
U meen Yareks workaround ?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 75 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group