View topic - Seagate 7200.12 similar to "СС" but not

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style

Seagate 7200.12 similar to "СС" but not

Page 1 of 1

[ 20 posts ]

Previous topic | Next topic

Author

Message

dmitradze

Post subject: Seagate 7200.12 similar to "СС" but not

Posted: February 8th, 2012, 6:43

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

Hello.
I've got Seagate 7200.12, 500Gb, now it isn't shown in BIOS.
Read a lot about CC, very similar symptoms. In Victoria and so on.
But. In terminal and Putty (without any isolation or connecting read-write) it shows:

Code:

RST 0x10M
RW: Disk Ctlr Initialization Completed
(P) SATA Reset

No messages with CC. It reacts on CTRL+Z, spins well, does /U, /Z (runs and stops when commanding), clears Smart /N1 without errors, does V1 and V4.
But after doing m0,2,2,,,,,22 it shows sth like this:

Code:

Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewrite Retries = not supported
User Partition Format Successful - Elapsed Time 0 mins 00 secs 
Zone re-format was skipped.

After doing everything written about CC it is not recognized in BIOS anyway.
What to do with Max Certify Rewrite Retries = not supported?
Whan else can I do?

Top

hddguy

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 8th, 2012, 7:09

Joined: November 9th, 2006, 15:15
Posts: 2984

Does it stay BSY?

I cant really see anything obvious here. Check its status register in MHDD and report here.

Top

dmitradze

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 8th, 2012, 7:48

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

OK, I'll do MHDD a few hours later and show logs.
Actually, I haven't checked the BUSY status after clearing the G-list and doing m0,2,2,,,,,2 for the second time, but after doing all the widely described operations it is still not shown in BIOS.
No mechanical suspicious sounds, no a word, containing "Error" shown etc.

Top

northwind

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 8th, 2012, 11:16

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece

Stop sending terminal commands because they're widely spread, or this will end with tears.

The method for 7200.11 does not work for your drive.
As hddguy suggests, check the status registers and see, if drive remains bsy then it is probably simple to solve.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Top

hddinfo

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 8th, 2012, 11:20

Banned User

Joined: January 28th, 2009, 5:50
Posts: 84
Location: united kingdom

this problem is due to firmware corruption, you can see output in terminal similar to LED: 000000BD FAddr : 00009010 or LED: 000000BD FAddr : 000074C0
there is a solution..... pls pm if you have problems with it.

Attachments:

led2.JPG [ 2.37 MiB | Viewed 15696 times ]

LED.JPG [ 559.72 KiB | Viewed 15696 times ]

_________________
banned user

Top

dmitradze

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 9th, 2012, 6:10

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

northwind wrote:

Yes, Victoria says it's still busy after doing all this.
I had no opportunity to run mhdd yet, I'll do it today.

So, after checkin' the status registers, if it's still busy, what should I do then?

Last edited by dmitradze on February 9th, 2012, 6:16, edited 1 time in total.

Top

dmitradze

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 9th, 2012, 6:15

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

hddinfo wrote:

No, it doesn't show any LED:000...BD
Only once, yesterday, it showed me LED:0000000CC FAddr:xxx, so "CC". But the message appeared when pressing extremely rapidly Ctrl+Z at the moment of plugging the power cable to HDD, immediately. And only once. But at other times it didn't appear and the drive obeyed all the commands.

Top

dmitradze

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 9th, 2012, 10:55

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

In MHDD status is BSY.
What else can I do with it? How to solve it?
Thx in advance!

Top

hddinfo

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 9th, 2012, 10:57

Banned User

Joined: January 28th, 2009, 5:50
Posts: 84
Location: united kingdom

send it to rostov on don. or other pros.

_________________
banned user

Top

dmitradze

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 10th, 2012, 6:27

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

What do you say?

Top

labtech

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 10th, 2012, 14:15

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

Sent PM, but did not think of checking the posts here first as I was in a rush, so it seems you have already tried what I suggested.

Sorry

Rostov on Don is the ACE labs headquarters: http://www.acelaboratory.com/

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

dmitradze

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 12th, 2012, 6:33

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

So, here are the commands:

Code:

F3 2>
F3 2>Z

Spin Down Complete
Elapsed Time 6.015 secs
F3 2>
ASCII Diag mode
 HighPowerMode
F3 T>/2
F3 2>U
ExecuteSpinRequest
Spin Up Complete
Elapsed Time 3.668 secs
F3 2>/1
F3 1>N1
Clear SMART is completed.
F3 T>i4,1,22
F3 T>m0,2,2,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewr
ite Retries = not supported

User Partition Format   0% complete, Zone 00, Pass 00, LBA 000000009A64, ErrCode
 00000080, Elapsed Time 0 mins 30 secs
User Partition Format Successful - Elapsed Time 0 mins 30 secs
Zone re-format was skipped.
F3 T>

At connection it shows this:

Code:

Rst 0x10M
RW: Disc Ctlr Initialization Completed.

(P) SATA Reset

ASCII Diag mode

F3 T>

What else can I do?

Top

dick

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 12th, 2012, 8:42

Joined: January 8th, 2008, 5:21
Posts: 927
Location: uk

After executing both the smart erase command and then also after the G list erase command did you power the drive off and then back on?

Top

dmitradze

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 13th, 2012, 2:05

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

dick wrote:

After executing both the smart erase command and then also after the G list erase command did you power the drive off and then back on?

Yes, I did. I've just tried repowering - the same result.

Top

dmitradze

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 17th, 2012, 5:49

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

After clearing SMART, repowering, clearing G-list, repowerinr, it went DRD DSC.

But after reseting PC it becimes invisible in BIOS and goes BSY again.

What else is there to try?

Top

hddguy

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 17th, 2012, 5:54

Joined: November 9th, 2006, 15:15
Posts: 2984

dmitradze wrote:

After clearing SMART, repowering, clearing G-list, repowerinr, it went DRD DSC.

You could have easily made things worse now. These disks perform a secondary test before being released from manufacturing plant, the results of which are saved to the list you have cleared.

As mentioned previously, the solution for this disk is different to previous models. If you do not know how to work with this disk then send it to someone who can before you lose all your data.

Top

BlackST

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 17th, 2012, 12:52

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

hddguy wrote:

dmitradze wrote:

After clearing SMART, repowering, clearing G-list, repowerinr, it went DRD DSC.

Bingo and ditto (not necessarily in this order) :mrgreen:

Hope data is not completely garbled at this point

Top

dmitradze

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: February 17th, 2012, 13:44

Joined: February 8th, 2012, 6:33
Posts: 12
Location: Russia

OK. I've found necessary data backuped on the other drive.
The disc is still warranted, so I'd like to return it.

What command should I run to erase all data quickly? How to format from terminal?

Top

rms610

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: March 11th, 2012, 5:17

Joined: December 16th, 2009, 6:43
Posts: 5
Location: Tehran

hddinfo wrote:

Hi
I have problem LED:000000BD,please help me.thanks.I have pc3000

Top

labtech

Post subject: Re: Seagate 7200.12 similar to "СС" but not

Posted: March 30th, 2012, 16:58

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

Read the PC3000 manual. It is all in there.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

Page 1 of 1

[ 20 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum