How to Disable Media Cache in ST3500830AS (7200.10)

I got T prompt T>

When i Cleared G-List, i can clone hdd at nominal speed, but after 10 to 15 again slowed down

then checking G-List entries added, Then i have clear again then continue to clone

How to disable reallocation here

i tried

T>F"RWRecoveryFlags",00,22
F"RWRecoveryFlags",00,22
SetStuff->

Here what i have to do?

sorry for my poor english

Any commands to stop background scanning and stop reallocation for 7200.10?

You are using F3 drive architecture commands on a classic architecture drive. Does it make sense doing so?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Nothing happened. when i issue the command it only display just "SETSTUFF-->"

there may be some commands to disable media reallocation for 7200.10 Series.

Pls share anyone

Use a loader if it's not F3

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town

you are sure that the disk has this problem?

In the terminal should look something like,

"CE Log ErrCode=xx LBA=xxxxxxx Type=5 Add To Pending xxxxxxx"


If there (CE log err), but dangerous if the disk has other problems....