MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Previous topic | Next topic 
Author Message
HddDonorMarket
 Post subject: Burned WD PCB no external bios chip. I need help
PostPosted: May 30th, 2022, 7:48 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 489
Location: Usa
My problem seeing at picture

Can I read bios with wiring. And wiring points??

Attachment:
20220530_150126.jpg
20220530_150126.jpg [ 1011.17 KiB | Viewed 6038 times ]

_________________
Sexy Womans from your town
Top
 Profile  
 
Lardman
 Post subject: Re: Burned WD PCB no external bios chip. I need help
PostPosted: May 30th, 2022, 8:59 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1290
Location: United Kingdom
You can either move the mcu or fix the pcb. It looks a burnt mess but have tried clearing it off - is there any actual pcb damage, I assume you have a donor for replacement parts.

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: Burned WD PCB no external bios chip. I need help
PostPosted: May 30th, 2022, 9:09 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 489
Location: Usa
I have swapped this components. nothing changed
Attachment:
Adsız.jpg
Adsız.jpg [ 227.79 KiB | Viewed 6022 times ]

_________________
Sexy Womans from your town
Top
 Profile  
 
unknown
 Post subject: Re: Burned WD PCB no external bios chip. I need help
PostPosted: May 30th, 2022, 9:35 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Replace the entire PCB and generate ROM from SA.
I can see it's 2060-701444 from sequoia drive 160 GB, Am I right?
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: Burned WD PCB no external bios chip. I need help
PostPosted: May 30th, 2022, 9:53 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 489
Location: Usa
WD3200AAJS-65VWA0

MRT has bug when writing ROM to internal ( embedded)
I have reported 2 years ago still same.(writing FF FF FF to first sectors)
Attachment:
no external ROM chip write with boot mode.jpeg
no external ROM chip write with boot mode.jpeg [ 173.79 KiB | Viewed 6011 times ]


unknown wrote:
Replace the entire PCB and generate ROM from SA.
I can see it's 2060-701444 from sequoia drive 160 GB, Am I right?


2060-701444 yes congragulation to you : )

_________________
Sexy Womans from your town
Top
 Profile  
 
fzabkar
 Post subject: Re: Burned WD PCB no external bios chip. I need help
PostPosted: May 30th, 2022, 13:30 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
Write the regenerated ROM code to a working donor HDD in SATA mode.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: Burned WD PCB no external bios chip. I need help
PostPosted: May 30th, 2022, 19:09 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 489
Location: Usa
fzabkar wrote:
Write the regenerated ROM code to a working donor HDD in SATA mode.

I lost my mind. Thats true .
I would try it. Tested a PCB ( diffrent number) has internal ROM. Writing properly in SATA mode.
Thank you for awaking me : )

_________________
Sexy Womans from your town
Top
 Profile  
 
fzabkar
 Post subject: Re: Burned WD PCB no external bios chip. I need help
PostPosted: May 30th, 2022, 19:16 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
Be aware that your PCB has a damaged Vcore supply and a damaged preamp supply. The latter may mean that your preamp is also damaged. I would measure the preamp resistances at your HDA pins.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: Burned WD PCB no external bios chip. I need help
PostPosted: May 31st, 2022, 5:00 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
fzabkar wrote:
Be aware that your PCB has a damaged Vcore supply and a damaged preamp supply. The latter may mean that your preamp is also damaged. I would measure the preamp resistances at your HDA pins.


Well Frank,
Preamp resistance on HDA pins will differ from HDD to HDD right ,But one might find out what pins they are by seeing the PCB ,In this case which pins do you think we should test

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
fzabkar
 Post subject: Re: Burned WD PCB no external bios chip. I need help
PostPosted: May 31st, 2022, 13:58 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
Pins 4 and 6 appear to be the preamp supply pins.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot], shamimdhali and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group