2B020H1 problem

ATHENA DSP
WAH21PBO
11A 05A KEBE
A5FBA
2B020H11110511

-first the drive identification bios athena
then I use copyr hot swap similar drive, but not KEBE and not A5FBA
the clon is good but only 10million sectors is good but rest are bad
-second the bad drive is good, bios is recognized good, and the ID is good, but the importand data are not back

my ask: what happend, then the drive will good, and how can i set back the all sectors

did u repair another group moudule or any other module except the SWAP
group module. if u did regenerate translator .
or else try recovering ur data ..

No I have not repaird any modules.

try regenrate translator that is the last solution i can think off

I found 2 module group errors (data copy 1 and data copy 2), i repaird those, but the disk have not worked good and i don't look the important data.

Hello KeFe,

send it to me!

pepe

thanks, but I would like save that

Hi,

OK, good luck!

regards,
pepe

then u must have replaced the wrong structure modules which havent matched the rom no of the drive