MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Previous topic | Next topic 
Author Message
FelixRuiz
 Post subject: Western Digital Drives Help
PostPosted: November 17th, 2007, 20:21 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
WD4000KD-00NAB0 SATA Drive

Begins to detect then as I am cloning drive in either MTL or Speedclone it slows down and comes to a stand still.


WD2000BB-00DWA0 IDE Drive DSCHCVJAA same behavior

I have PC3000PCI and if it is firmware please send to my PM or your thoughts if it maybe head stack replacement.

Thank you..
Top
 Profile  
 
rameez
 Post subject: Re: Western Digital Drives Help
PostPosted: November 25th, 2007, 12:12 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
Check Surface in universal utilities in pc3k .
Top
 Profile  
 
FelixRuiz
 Post subject: Re: Western Digital Drives Help
PostPosted: November 27th, 2007, 19:51 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
WD4000KD-00NAB0

SA structure test

SA MODULES LIST
-------------------------------------------------------------------------------------------------------------------------
Id:Copy: Importance:Cyl :Head:Sector:Size:Read : Hdr : CS : CS Value: Date : Vers.: Desription
-------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------

Zone allocation table
Number of zones......................... : 21
-------------------------------------------------------------
# : Initial cylinder : Final cylinder : SPT
-------------------------------------------------------------
0 : -32 : 31 : 888
1 : 32 : 9 023 : 1 166
2 : 9 024 : 17 343 : 1 152
3 : 17 344 : 25 439 : 1 134
4 : 25 440 : 29 183 : 1 123
5 : 29 184 : 37 279 : 1 110
6 : 37 280 : 39 455 : 1 104
7 : 39 456 : 47 167 : 1 080
8 : 47 168 : 52 191 : 1 036
9 : 52 192 : 58 335 : 1 008
10 : 58 336 : 64 223 : 972
11 : 64 224 : 68 479 : 936
12 : 68 480 : 70 591 : 918
13 : 70 592 : 73 759 : 891
14 : 73 760 : 79 167 : 864
15 : 79 168 : 82 271 : 820
16 : 82 272 : 86 207 : 792
17 : 86 208 : 90 911 : 756
18 : 90 912 : 94 335 : 720
19 : 94 336 : 97 759 : 691
20 : 97 760 : 98 622 : 678
-------------------------------------------------------------

CONFIGURATION SECTOR (42)
Not found in modules directory

Log DCM (C5)
Not found in modules directory

Log Version Info (4E)
Not found in modules directory

P-List (43)
Not found in modules directory

G-List (44)
Not found in modules directory
Top
 Profile  
 
pcimage
 Post subject: Re: Western Digital Drives Help
PostPosted: November 28th, 2007, 4:42 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
As Rameez says, surface test, not SA structure test. :-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
FelixRuiz
 Post subject: Re: Western Digital Drives Help
PostPosted: November 28th, 2007, 22:44 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
SA surface verification
Initial cylinder........................ : -1
Final cylinder.......................... : -20
Head.................................... : 0,1
Cyl -1 Head 0........................... : Errors : 0

Cyl -1 Head 1........................... : Errors : 0

Cyl -2 Head 0........................... : Errors : 0

Cyl -2 Head 1........................... : Errors : 0

Cyl -3 Head 0........................... : Errors : 0

Cyl -3 Head 1........................... : Errors : 0

Cyl -4 Head 0........................... : Errors : 0

Cyl -4 Head 1........................... : Errors : 0

Cyl -5 Head 0........................... : Errors : 0

Cyl -5 Head 1........................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -6 Head 0........................... : Errors : 0

Cyl -6 Head 1........................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -7 Head 0........................... : Errors : 0

Cyl -7 Head 1........................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 30................................. AMN
31...................................... UNC
32 -- 34................................ AMN
35...................................... UNC
36 -- 182............................... AMN
183..................................... UNC
184 -- 293.............................. AMN
294..................................... UNC
295 -- 400.............................. AMN
401..................................... UNC
402 -- 441.............................. AMN
442..................................... UNC
443 -- 511.............................. AMN
512..................................... UNC
513 -- 515.............................. AMN
516..................................... UNC
517 -- 887.............................. AMN
--------------------------------------------------

Cyl -8 Head 0........................... : Errors : 0

Cyl -8 Head 1........................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 30................................. AMN
31...................................... UNC
32 -- 34................................ AMN
35...................................... UNC
36 -- 178............................... AMN
179..................................... UNC
180 -- 215.............................. AMN
216..................................... UNC
217 -- 256.............................. AMN
257..................................... UNC
258 -- 326.............................. AMN
327..................................... UNC
328 -- 474.............................. AMN
475..................................... UNC
476 -- 515.............................. AMN
516..................................... UNC
517 -- 887.............................. AMN
--------------------------------------------------

Cyl -9 Head 0........................... : Errors : 0

Cyl -9 Head 1........................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -10 Head 0.......................... : Errors : 1
--------------------------------------------------
Sectors :Error
--------------------------------------------------
1....................................... AMN
--------------------------------------------------

Cyl -10 Head 1.......................... : Errors : 881
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 1.................................. AMN
9 -- 887................................ AMN
--------------------------------------------------

Cyl -11 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -11 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -12 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -12 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -13 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -13 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -14 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -14 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -15 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -15 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -16 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -16 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -17 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -17 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -18 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -18 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -19 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -19 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -20 Head 0.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

Cyl -20 Head 1.......................... : Errors : 888
--------------------------------------------------
Sectors :Error
--------------------------------------------------
0 -- 887................................ AMN
--------------------------------------------------

SA surface verification completed



THANK YOU FOR THE RESPONSES
Top
 Profile  
 
FelixRuiz
 Post subject: Re: Western Digital Drives Help
PostPosted: December 1st, 2007, 22:02 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
WD4000KD-00NAB0 SATA Drive
Continue to get WD TECHNO READ ERROR C/H/S
Device Error Detected 51/01 (AMN)
Top
 Profile  
 
Starling
 Post subject: Re: Western Digital Drives Help
PostPosted: December 3rd, 2007, 14:19 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
Most likely one of the non-system heads is weak. SA should be fine.
WD4000KD-00NAB0 is not supported by neither version of PC3000 yet.

Try head test in WD utility.
If you have Data Extractor you should try to create a headmap, see which head is bad and image by those that are good.
Top
 Profile  
 
FelixRuiz
 Post subject: Re: Western Digital Drives Help
PostPosted: December 4th, 2007, 0:02 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
Here is the head map report

Techno mode key:
HDD geometry loading.................... : Ok
Cyl Count............................... : 98591
Head Count.............................. : 8
SPT..................................... : 888

RAM:
Zone allocation table................... : Ok
ROM version............................. : 01.24.
SA FW version........................... : 01.24A
Link table version...................... : 06.EA.

Serial ROM:
Read ROM................................ : Ok
Heads configuration..................... : Default

Service area:
Modules table loading................... : SA Directory checksum error
Configuration loading................... : Module 42 not found in modules directory
Translation overlay checking (Copy 0)... : Not found in modules directory
Translation overlay checking (Copy 1)... : Not found in modules directory

Heads test
Cylinder to test........................ : -25
Heads to test........................... : 0,1,2,3,4,5,6,7
Head 0................................. : Ok
Head 1.................................. : Ok
Head 2.................................. : Ok
Head 3.................................. : Ok
Head 4.................................. : Ok
Head 5.................................. : Ok
Head 6.................................. : Ok
Head 7.................................. : Ok

Thank you for your help.
Top
 Profile  
 
Starling
 Post subject: Re: Western Digital Drives Help
PostPosted: December 4th, 2007, 10:40 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
- Either you have wrong head map(I don't remember now how many heads this model should have)
- Or someone tried to manually edit DIR.
- Or SA was erased completely.
Top
 Profile  
 
FelixRuiz
 Post subject: Re: Western Digital Drives Help
PostPosted: December 4th, 2007, 10:53 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
Any suggestions? I have an I dentical drive and get the same results from the good working drive.
Top
 Profile  
 
beto
 Post subject: Re: Western Digital Drives Help
PostPosted: December 4th, 2007, 14:07 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
Hello post us here the complete report of the SA Structure u can try too MHDD to diagnostic, with the scan command, checking with Register Error show´s while´s reading sectors

AMNF, IDNF or UNC

Best Regards
Top
 Profile  
 
FelixRuiz
 Post subject: Re: Western Digital Drives Help
PostPosted: December 5th, 2007, 16:09 
Offline

Joined: August 20th, 2007, 19:42
Posts: 41
dRIVE WAS HIT BY POWER SURGE SO POSSIBLY THE HEADS ARE BAD AND SHOULD BE REPLACED?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: ChaosMageX and 80 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group