MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Previous topic | Next topic 
Author Message
raf-pl
 Post subject: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 5:42 
Offline

Joined: October 30th, 2006, 10:41
Posts: 48
Location: Poland
Dears,

I have a problem with Maxtor Fireball 3 20GB drive.
PC3000 detects is as VAM52JBZ and shows as 0 capacity [MB()].
I see on the drive label VAM51JJ0 so something is wrong.
Do you have any suggestions how to get data out from it?

Regards,
Rafal
Top
 Profile  
 
irs
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 6:29 
Offline
User avatar

Joined: July 22nd, 2008, 5:04
Posts: 160
Location: Italy
hi did you try to enter with a loader and create its own loader?

_________________
Data Recovery pro in Italy
www.ultrarecovery.com
Top
 Profile  
 
raf-pl
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 6:34 
Offline

Joined: October 30th, 2006, 10:41
Posts: 48
Location: Poland
Hi,

I suppose the problem with loader but I can not find any for my drive (20GB). Hddguru contains only for 30GB and 40GB. Do you know where can I find ldr for my drive?

Regards,
Rafal
Top
 Profile  
 
helpdisc
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 7:02 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
30 gig loader will do, it is some module error...

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
irs
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 8:00 
Offline
User avatar

Joined: July 22nd, 2008, 5:04
Posts: 160
Location: Italy
If you want, give me (pm) your e-mail and i'll send you one for 2F020J0-VAM51JJ0

_________________
Data Recovery pro in Italy
www.ultrarecovery.com
Top
 Profile  
 
beto
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 9:36 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
Looks like a SA problem, if u got DRDY DSC ATA registers but when u tried to read x sector u got ABRT, its an syntomph of SA problems wich should be checked SA Modules

Regards

Alberto
Top
 Profile  
 
raf-pl
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 10:45 
Offline

Joined: October 30th, 2006, 10:41
Posts: 48
Location: Poland
Hi,

I am coming back with the problem. Thanks to IRS I received ldr but it doesn't work. It stops during loading overlies. So I tried use other loaders and few work showing correct firmware but capacity is 40GB.
So when I try to pass through utility start there is an information that
- read roadmap - ok
- read roadmap extension - ok
- read zone allocation - ok
but it stops futher with error: UBA 8 reading error. Drive is not ready.

Do you have any suggestions?

Regards,
Rafal
Top
 Profile  
 
pcimage
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 11:13 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
What version PC3000 u using?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
raf-pl
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 11:30 
Offline

Joined: October 30th, 2006, 10:41
Posts: 48
Location: Poland
Hi,

this is 2.20.

Regards,
Rafal
Top
 Profile  
 
N.C.
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 23rd, 2008, 20:33 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
raf-pl wrote:
Dears,

I have a problem with Maxtor Fireball 3 20GB drive.
PC3000 detects is as VAM52JBZ and shows as 0 capacity [MB()].
I see on the drive label VAM51JJ0 so something is wrong.
Do you have any suggestions how to get data out from it?

Regards,
Rafal


Hello,

Multiple letter is changed, this can be head damage!
Did you try to replace?

The NAR61590 fw shows up NAR6253Z with dead head!
The same letter is changed.

Regards,
Janos
Top
 Profile  
 
shahij
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 24th, 2008, 12:08 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
Fireball 3 is complex and worst HDD ever manufactured by Maxtor. Anyway, it might SA defect...
Individual experience can identify the truth.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
rameez
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 25th, 2008, 15:06 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
Most of the time when this drive shows 0mb it mostly head problem.
Top
 Profile  
 
shahij
 Post subject: Re: Maxtor Fireball 3 detects as VAM52JBZ
PostPosted: July 26th, 2008, 4:06 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
Quote:
Most of the time when this drive shows 0mb it mostly head problem.

yea, for most of the case.
but most of the case for Fireball 3 Series in my experience its SA defect.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group