Hi
i am newbie i have WD10EAVS-00D7B1 F/w:000500CE it was showing 0MB capacity not showing Model i tried to access RAM head Map change it is not allowing showing no head found i rewrite ROM unfortunately i selected wrong ROM now it is not detecting i checked with Jumpers also Thanks for any Help PCB Number is 2061-701590-A00 AC

Why are you playing around with the rom?

_________________
Zero Alpha: zeroalpha.com.au
Find Cheap Donor Drives App: https://www.zeroalpha.com.au/donor-drive-app Updated February 2026

is it possible to Repair it or i can Change ROM chip i have Resources Backup please let me know which is the ROM chip Thanks for any comments.

You'll need special gear to rebuild the ROM from the SA, assuming that you don't have other mechanical or PCB issues.

_________________
http://www.datasaversllc.com

Thanks for reply jono-ate by mistake i rewrite wrong ROM when i plug power on in Pc3000 all lights are showing drive is not taking power also.

The ROM is in the MPU in this series and you need a SMT station to change it out. Easiest approach would be buy a compatible donor, swap PCB, and rebuild ROM from SA with PC3000. If you don't know what you are doing you should find someone who can help you, or you may ruin ROM again.

_________________
http://www.datasaversllc.com

The drive is not spinning? You wrote the wrong ROM ? Oh dear..

You need a data recovery company that knows how to circumvent the Embedded ROM. If you have a copy of the original ROM it will be a great help to whoever you choose to help you with this.

_________________
If you can keep your head when all about you are losing theirs, you probably don't fully understand the situation. ... Mr Kipling

https://www.mjm.co.uk/

Totally agree with Jono-ats...











XRONIS

_________________
T3 Professional Data Recovery
http://www.t3-recovery.com