View topic - PCB WD2000JD Wanted

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

PCB WD2000JD Wanted

Page 1 of 1

[ 8 posts ]

Previous topic | Next topic

Author

Message

kmedhus

Post subject: PCB WD2000JD Wanted

Posted: April 30th, 2010, 22:41

Joined: April 30th, 2010, 22:30
Posts: 5
Location: North Dakota

I'm looking for a working PCB for my WD2000JD.

WD P/N: WD2000JD-22HBC0
Form Factor: 3,5"

Code on PCB: 2061-701267-001 Rev A
Code on sticker: 2061-701267-200 AL

Main controller WD70C26 - GP v2.1
Motor controller L6283 v1.3

Thank You in advance

Top

mr_spokk

Post subject: Re: PCB WD2000JD Wanted

Posted: May 1st, 2010, 7:21

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden

kmedhus wrote:

Code on PCB: 2061-701267-001 Rev A

Hi, sure it's not 001267-001 on that one?

Bosse

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se

Top

unknown

Post subject: Re: PCB WD2000JD Wanted

Posted: May 1st, 2010, 17:36

Joined: October 21st, 2007, 8:48
Posts: 1712

Quote:

Hi, sure it's not 001267-001 on that one?

Sorry, Bosse but I have to disagree with you.

It's the original PCB for this drive. Also 1266 and 1265 (IDE PCB) should work.

Good luck

Top

rameez

Post subject: Re: PCB WD2000JD Wanted

Posted: May 2nd, 2010, 5:35

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !

I have this working pcb in stock PM me for more details .

Top

kmedhus

Post subject: Re: PCB WD2000JD Wanted

Posted: May 2nd, 2010, 14:17

Joined: April 30th, 2010, 22:30
Posts: 5
Location: North Dakota

Here is the image of the burnt chip L6283.

Attachments:

P1012609.JPG [ 219.45 KiB | Viewed 5014 times ]

Top

networkpc3000

Post subject: Re: PCB WD2000JD Wanted

Posted: May 2nd, 2010, 21:06

Joined: December 16th, 2007, 10:26
Posts: 1151

hi,
it's the PCB fix for you need. i have it in stock.
http://gotbackdata.com/Upimg/photos/lar ... 20REVA.jpg

_________________
data recovery service[/b]

Top

kmedhus

Post subject: Re: PCB WD2000JD Wanted

Posted: May 3rd, 2010, 20:33

Joined: April 30th, 2010, 22:30
Posts: 5
Location: North Dakota

I have the 2061-701267-001 Rev A PCB not the -001267 I think that will make a difference.

Top

OlegK

Post subject: Re: PCB WD2000JD Wanted

Posted: May 6th, 2010, 4:02

Joined: July 14th, 2005, 0:59
Posts: 3

2061-701267 SATA = 2061-701265 PATA + rewrite flash

Top

Page 1 of 1

[ 8 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum