had my hard drive which i accidentally dropped down.i tried to repair it .it was producing tit tit sound.after repair,it is seen using the device manager as an external drive but when you check properties it reads zero mbs.it is an external hard drive.it can not be seen when you use my computer icon.am using Windows xp.pliz assist me i want it working.by now it is fine but reads zero mbs

As you now have 2 identical threads in different forums...... momentus-5400-detected-azero-t16592.html
That dosn't look good!

So if you want help you better start off by describing EXACTLY what you did. Stage by stage!
In answer to your last question.


I would suggest to do the obvious!

U can get victoria and MHDD on hirens boot disk. Just google it. But i dont think it will help u much m8. Sry.

Yea id like to learn how to adjust the spindle too.

_________________
It seems that the unluckiest people in the world are those that don't backup.
Free Solutions
Picasaweb- Pictures and movies | Dropbox - Documents and other..

previously my hard drive was producing tik tak sounds .so i opened the drive and took out the spindles ,adjusted the spindles then closed the harddrive.the hard drive stopped to produce the tik tak sound.but now it can detected but it can not be seen under my computer.it is detected in the device manager.it is seen with zero mb .please assist me

If you moved even few mm. the platters, cylinder / 'index'/skew alignment is lost. At this point probably with 5'000 dollars you have chances, otherwise data is gone forever.

Another classic!

_________________
Bitlevel Data Recovery

yikes.

_________________
It seems that the unluckiest people in the world are those that don't backup.
Free Solutions
Picasaweb- Pictures and movies | Dropbox - Documents and other..

Adjusted the spindles?

This was a bad move.