Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
July 4th, 2011, 9:15
Hi,
I've a ´Momentus 5400.6 here that is spinning up, then ticking fast a fews times and then quitting with
Rst 0x08M
RW cmd 002F req = 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 00
00 A0 E1
opts = 00000000
RW Err = 84150180
The error is the very same whether the PCB is mated to the HDA or not?!
July 4th, 2011, 9:24
looks like your drive is dead. was it dropped or subjected to a power outage?
July 4th, 2011, 10:06
shaun wrote:Hi,
I've a ´Momentus 5400.6 here that is spinning up, then ticking fast a fews times and then quitting with
Rst 0x08M
RW cmd 002F req = 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 00
00 A0 E1
opts = 00000000
RW Err = 84150180
The error is the very same whether the PCB is mated to the HDA or not?!
i guess its the 0 lba, and most probably heads problem
July 5th, 2011, 3:42
I would do proper diag to be extra sure...
July 9th, 2011, 17:55
The solution: water. The net book it came from was soaked, and some of it made its way into the HDA through the head amp/vcm connector.
Probably only an electrical problem that could be solved by replacing the head stack, but as the customer is not willing to pay, we won't never know
Powered by phpBB © phpBB Group.