MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Question by mistake WD
PostPosted: March 31st, 2013, 21:10 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
Have Zifir. We have a problem. Start with 28 module script.

after the start we 35sek. and blade drive (reset)

then we have the Debug Stop Code .......: 14,108

transcript: RSC_DEBUGSTOP_PERM_ALLOC_TOO_LARGE

Actually the question ... Varya change? or somehow really clear what you do not have enough to run? ...

It seems like it is not enough buffer. but in such a little hard to believe ..

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: March 31st, 2013, 21:18 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
I use many software solutions to repair the drive. PС3000 VDR and more.
I'm trying to start a new Zifire test of 28 modules. but it is dropped. and the error mentioned above.

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: March 31st, 2013, 22:19 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
ideas over?)

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: March 31st, 2013, 22:44 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
All of the above does not work on new Zefir.i all this was done in the first place.

when you try to start the SS have Debug Stop Code .......: 14108

or you will not come across drives new 2012? :D

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 1st, 2013, 4:56 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
Spildit,
I use PC 3000 and many other software. everywhere the same debug code

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 1st, 2013, 6:00 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
Spildit,
and and head off to the fact that the self does not run a scan? .. if the head was problematic. it has long b solved.
I understand you have not come across WDC WD5000BEVT-24A0RT0 (2012 of release)

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 1st, 2013, 15:10 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
There is restriction on this drive for selfscan Sediv managed to break this restriction why dont you talk to him


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 1st, 2013, 16:02 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
Explains. the reason is not that what that module is not correct or rather step. the question is how to overcome the mistake.

Program versions do not matter here

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 1st, 2013, 16:43 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Tink wrote:
Explains. the reason is not that what that module is not correct or rather step. the question is how to overcome the mistake.


Use another FW that work. Are you sure you don't have residual FW data on other heads and it is starting correctly ?


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 1st, 2013, 17:22 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
So we have to have PC3000, WDR, SeDIV and what else ?


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 12:43 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
rameez, its utility. does not work even with such discs
BlackST, Boil version does not matter. CA itself locked here for the start of the SS

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 12:48 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
Spildit, in these drives PST size zero. you can create one with this? ). all you need .. this increase as a PST

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 12:49 
Offline

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy
Does anyone got headeache dealing with this english!?


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 12:50 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
positivebit, in the sense?

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 12:54 
Offline

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy
Tink, understanding you.. not in offensive way. :)


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 13:06 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
positivebit, but you can try to write in Russian?

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 13:23 
Offline

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy
Tink wrote:
positivebit, but you can try to write in Russian?


only when i have >0.8% alchool in my body ;)


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 15:18 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
Spildit, actually. I have written the problem, due to which no test runs of the 28 modules

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 15:49 
Offline

Joined: January 22nd, 2012, 18:21
Posts: 27
Location: Украина.Феншуй
Spildit, but where does the script from 28 module? ... here the problem with the start) and not with the module. ...

_________________
WDmarvel


Top
 Profile  
 
 Post subject: Re: Question by mistake WD
PostPosted: April 2nd, 2013, 16:35 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
@Tink,
Sediv designed a new utility to run selfscan on Zephyr . That is why i asked you to contact Sediv.

@Splidit,
WD has put restriction on this family to make it hard to start selfscan so some alterations has to be done in order to run selfscan.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group