st3160812AS 3.AAH 7200.9 Terminal OUTPUT

[gps31]

Terminal Output

Code:

üInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38
y
…ÂÿInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38

‚8
MÿInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38
²ÈÿInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38


0þInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38
‚ÂÉInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38
‚IÙþInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38
Ò   "þInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38
‚2’öInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38
q³þInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38
’’’ÉInterface task reset
4096k x 16 SDRAM
TONKA2 - 1_Disk    M-31   02-07-06 16:38
.
.
.
.
Repeating without STOP or Terminal


If PCB Changed the Same OUTPUT

Let me know the Problem and Advise

[gps31]

is it mechanical or something else?

Experts pls

[lcoughey]

If PCB Changed the Same OUTPUT

Did you move the ROM with the PCB? Are you certain that it is the original PCB?

[gps31]

Both PCB Output same

No Rom Transfer

[northwind]

I think you need to understand the basics for Seagate troubleshooting.
If you swap the PCB without transferring the ROM, then you're just spinning your wheels. (Unless you're VERY experienced and have the proper tools and knowledge).

If you want to rule out PCB then you NEED to transfer the ROM otherwise you're only wasting your time.

If the data is of any value, please pass this drive to someone who knows what he's doing.

[gps31]

transferring the ROM done but same output