WD1600AAJS-60B4A0 PCB Swap

Data recovery and HDD repair discussions

Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
crystalrajasthan

WD1600AAJS-60B4A0 PCB Swap

March 7th, 2016, 2:38

I have a WD1600AAJS-60B4A0 Sata hdd with PCB Burn with no ROM on the board and when I attach the donor PCB....paitient hdd motor spins continuously but not get detected.
Attachments
WD1600AAJS-60B4A0.jpg
MindMergepk

Re: WD1600AAJS-60B4A0 PCB Swap

March 7th, 2016, 4:37

what tools you have to work with ?
crystalrajasthan

Re: WD1600AAJS-60B4A0 PCB Swap

March 7th, 2016, 5:18

As we are working on PC-3000
thatdellguy
  • thatdellguy
  • Posts: 1898
  • Joined: August 19th, 2007, 17:30
  • Location: In your hard drive.

Re: WD1600AAJS-60B4A0 PCB Swap

March 7th, 2016, 6:38

Have you read the PC3000 WD manual?
MindMergepk

Re: WD1600AAJS-60B4A0 PCB Swap

March 7th, 2016, 7:29

crystalrajasthan wrote:As we are working on PC-3000


is it legal pc3k from Acelab ?
there is a way to rebuild ROM on these Marvel drives in pc3k (original).
read your manual.
labtech
  • labtech
  • Posts: 3669
  • Joined: August 18th, 2010, 17:35
  • Location: Massachusetts, USA

Re: WD1600AAJS-60B4A0 PCB Swap

March 7th, 2016, 12:17

crystalrajasthan wrote:I have a WD1600AAJS-60B4A0 Sata hdd with PCB Burn with no ROM on the board and when I attach the donor PCB....paitient hdd motor spins continuously but not get detected.

This is expected as the donor PCB is not compatible "as is".
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index