WD5003AZEX
March 30th, 2016, 15:57
Had my WD Caviar Black 500GB drive die on me. Initially the drive wouldn't even power on so I swapped out the main board, now I have power and disk is spinning up but weird clicking noise. I opened it up and took this video. Anyone have any ideas on whats going on with this?
https://youtu.be/8N52UBhV4Z4
Please let me know. Thanks!
https://youtu.be/8N52UBhV4Z4
Please let me know. Thanks!
Re: WD5003AZEX
March 30th, 2016, 16:37
Yes, likely the PCB is not compatible as is due to unique adaptives.
As far as opening the drive and running the without cover: good luck.
As far as opening the drive and running the without cover: good luck.
Re: WD5003AZEX
March 31st, 2016, 1:32
agreed,
this is very often that people first mess up and than ask on forums.
Opening the hard drive in non-clean environment is really a bad idea what is more you have power it up.
you should send it to a DR company to check if there is some hope left for it.
good luck
this is very often that people first mess up and than ask on forums.
Opening the hard drive in non-clean environment is really a bad idea what is more you have power it up.
you should send it to a DR company to check if there is some hope left for it.
good luck
Re: WD5003AZEX
March 31st, 2016, 1:36
Yep, you just turned a simple recovery to a more complex one. 
Powered by phpBB © phpBB Group.