MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
helpless
 Post subject: Toshiba 1.8" pinout
PostPosted: March 10th, 2017, 8:51 
Offline

Joined: February 26th, 2013, 6:58
Posts: 211
Location: Hungary
Hi,
Can someone help me identify pin 1 on mk1003gal? I bought an adapter and having trouble finding the correct way of attaching the drive to it.
TIA.

_________________
Those who know don’t talk. Those who talk don’t know.
Top
 Profile  
 
Tomset
 Post subject: Re: Toshiba 1.8" pinout
PostPosted: March 10th, 2017, 9:15 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
https://yadi.sk/i/ieEXH7VA3FSzNn
Top
 Profile  
 
helpless
 Post subject: Re: Toshiba 1.8" pinout
PostPosted: March 10th, 2017, 10:30 
Offline

Joined: February 26th, 2013, 6:58
Posts: 211
Location: Hungary
Thank you / Спасибочки :wink:

_________________
Those who know don’t talk. Those who talk don’t know.
Top
 Profile  
 
fzabkar
 Post subject: Re: Toshiba 1.8" pinout
PostPosted: March 10th, 2017, 13:59 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
Without power applied, plug the adapter into the HDD. Using a multimeter, test for continuity between a ground point on the adapter and a ground point on the HDD PCB (eg a screw hole). Invert the adapter and repeat the test.

For additional confidence, repeat the test for the +3.3V test points. The +3.3V pins on the HDD side should be identifiable by their thicker power traces.

MK1003GAL (HDD1262) 1.8-inch Hard Disk Drive User Manual:
http://pdfstream.manualsonline.com/9/99dc24ed-06f2-4319-b858-a98b7b2948f0.pdf


Attachments:
s-l1600_IDE_18-35_power.jpg
s-l1600_IDE_18-35_power.jpg [ 153.46 KiB | Viewed 6097 times ]

_________________
A backup a day keeps DR away.
Top
 Profile  
 
helpless
 Post subject: Re: Toshiba 1.8" pinout
PostPosted: March 11th, 2017, 7:04 
Offline

Joined: February 26th, 2013, 6:58
Posts: 211
Location: Hungary
Thank you, Franc, I could figure out based on Tomset's answer.
Now the only thing I need is some VSC's to clear SMART and G-list. :)


Attachments:
1.8adapter.JPG
1.8adapter.JPG [ 84.05 KiB | Viewed 6056 times ]

_________________
Those who know don’t talk. Those who talk don’t know.
Top
 Profile  
 
fzabkar
 Post subject: Re: Toshiba 1.8" pinout
PostPosted: March 11th, 2017, 14:23 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
You can read the CPs using appropriate commands in MHDD or other ATA terminal software such as HDDSuperTool:
http://www.hddoracle.com/viewtopic.php?t=1254&p=11784

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group