Seagate SSHD ST1000LM014

Know anybody problem of this HDD?
It doesnt spin, and i post messages from terminal

Code:: ERROR: Flash LED 9C1C - No clumps available - cannot get new active clump Clump Parametrics: Clump = 0264 DataType = 00E0 ModeFlag = 01 EraseCount = 000007E3 EraseFailCount = 00 ProgramFailCount = 00 WeakReadCount = 00 UncorrectableECCError = 00 ---SOC PSM Command History--- Cmd#/PsmCmd Clump Offset Length LbaMid LbaLow LbaBits39To32 Options Status DestClump DestOffset 000A 0264 0000 0001 0000 000E 0000 8000 0021 075F E010

I have a SSHD with this problem too.
Could anyone help me?

Here it is the terminal message:

Code:: ERROR: Flash LED 9C1C - No clumps available - cannot get new active clump Clump Parametrics: Clump = 00CD DataType = 00D0 ModeFlag = 01 EraseCount = 00000AE8 EraseFailCount = 00 ProgramFailCount = 00 WeakReadCount = 00 UncorrectableECCError = 00 ---SOC PSM Command History--- Cmd#/PsmCmd Clump Offset Length LbaMid LbaLow LbaBits39To32 Options Status DestClump DestOffset 000A 00CD 0000 0001 0000 000E 0000 8000 0021 8145 6FE1

Hello, Saltwater,

yes, I can help with this drive. It seems we are not too far from eachother...

pepe

Hello, were you able to defeat this mistake? If you could, then tell us how it can be fixed. Thank you

Hello,

yes, i've done several of these drives since then.
How: find error in firmware and correct it.

SSHD drive, problem with NAND content. Possible to fix.

pepe wrote:Hello,

yes, i've done several of these drives since then.
How: find error in firmware and correct it.

Can you help with the recovery of this disk?

Hi,

sure, but i need physical access to the drive, ie i do not do it remotely.

Sorry, physical access is unrealistic, very far. Which version should I look at? I'll try to raise it myself

eh, do you live in some different galaxy or what?

i get drives from perfectly opposite side of the planet too.

Which version should I look at?

I don't get what you are asking for.

pepe

Re: Seagate SSHD ST1000LM014