Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

I need LDR for ST380815AS.

March 3rd, 2021, 9:17

I need LDR for ST380815AS
Firmware version: 3.CHF
I use MRTLAB.

Thanks.

Re: I need LDR for ST380815AS.

March 4th, 2021, 6:18

I have got it. Thanks.
Attachments
ST380815AS-3.CHF-6RW0QF4Y-S3E-.082-E504-032707-DATA.rar
(465.26 KiB) Downloaded 412 times

Re: I need LDR for ST380815AS.

March 4th, 2021, 10:02

I have the following error. Can anyone give me any ideas?
Code:
T>Reset
1024k x 16 DRAM
NHAWK - 1_Disk    S-3E   03-27-07_13:53
HM SFI
!
(P)Failed sys sect. write! Nwt Er 33 RdWr 13b44.00.0003

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Failure!
Failed sys sect. write! Nwt Er 00 RdWr 13b44.00.0003
Failed sys sect. write! Nwt Er 33 RdWr 13b46.00.0163

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Failure!
Failed sys sect. write! Nwt Er 00 RdWr 13b46.00.0163

Re: I need LDR for ST380815AS.

March 4th, 2021, 16:47

I have experienced sometimes with this type of drives, i never solved with MRT ldr.
Instead, if i remember well, this type of issue i solved by doing hot swap, but you need same type of drive and same fw version as donor.

P.S.
Before doing hotswap i suggest to backup modules with sediv or STcom, because MRT doesn't even backup modules correctly from drives with F architecture.

Re: I need LDR for ST380815AS.

March 5th, 2021, 14:22

Thank you very much michael chiklis.
I will follow your advice and comment on the results.
Post a reply