When i try to patch the rom and write them back i get "Seagate flash boot code" error in terminal, I tried with all the 3 patches but its the same i have attached the rom as well can any one help me patch this rom for me

Drive details:
ST4000NE001
2MA101-500
F/W: EN01

I do not understand the need to mess with the disk firmware. Unless the disk is dysfunctional leave well enough alone.

_________________
USB 3.5" enclosures are $19 USD postage paid from China, I own several

I don't see a file. Ensure you start the utility with the family selected. Generic F3 can create this issue.

Bold statement with as little information about the reason for messing with the firmware.

Not able to get sector access, for the reason i need rom patch to get sys files access

can you share the full terminal log on power up... it will explain many things...

_________________
Data Recovery Pakistan

Hi pls find the below terminal log

Terminal log before ROM patch


Boot0x0100MBJ0371EN01
Trans
Rst0x0100MBJ0371EN01
(P)SATAReset

NVCScramSavedHBSize:020A
LD:MD_Alloc:000000F0HB_Alloc:0000DiscRestoreMD_Saved:000000F0HB_Saved:00000000MD_CRC:8679
PP:MD_Alloc:0000F000HB_Alloc:0000DiscRestore
PVTSize:00045458 CompSize:000008BE DeCompSize:00045458MD_Saved:000008BEHB_Saved:00000000MD_CRC:44CC
TW:MD_Alloc:00000400HB_Alloc:002EDiscRestoreMD_Saved:00000160HB_Saved:00000000MD_CRC:0000
GC:MD_Alloc:00005000HB_Alloc:0000DiscRestoreMD_Saved:00004320HB_Saved:00000000MD_CRC:2AE0
DSP029F
2Sync:0 4

No Sector access

Terminal Log after patching ROM


Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

Flash boot code Digital Signature Verification failure!

Flash boot code checksum failure!

SEA3 Boot ROM 2.0 (08/01/2016)
Copyright Seagate 2016

the first log seems fine, NVC is intact,
did you send handshake while checksum failure error in terminal on new drives this is normal... after handshake drive started spinning and unlock..

_________________
Data Recovery Pakistan

Hi thank you so much for the support, it worked after translator regeneration got all sector access