MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
gsimon
 Post subject: WD1600JS-00MHB1 --- Help !
PostPosted: March 20th, 2008, 10:35 
Offline

Joined: October 7th, 2005, 2:03
Posts: 152
Location: serbia
HDD with the burnt pcb:

WD1600JS-00MHB1
pcb: 2060-701335-005 REV A (with 88i6545-TF1)
fw: 10.02E01


I found these two good pcb's from:

WD2000JS-00MHB0
pcb: 2060-701335-003 REV B (with 88i6545-TF1)
fw: 02.01C03

WD1600JS-00NCB2
pcb: 2060-701335-005 REV A (with 88i6889-TF1)
fw: 10.02E03

I have changed the ROM U12 in both good pcbs
and hdd is not working
after few clicking go to safe mode and
after
WD .......HAWK
give:
10.02E02 ( firmware revision )

THIS is the reason that i suppose that the ROM is ok
but I am not shure that the PCB's are fully compatible...

Does anybody have any suggestion ?

_________________
Spasavanje podataka
Top
 Profile  
 
Doomer
 Post subject: Re: WD1600JS-00MHB1 --- Help !
PostPosted: March 20th, 2008, 12:27 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
Preamp is probably dead too

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
gsimon
 Post subject: Re: WD1600JS-00MHB1 --- Help !
PostPosted: March 20th, 2008, 14:29 
Offline

Joined: October 7th, 2005, 2:03
Posts: 152
Location: serbia
Doomer wrote:
Preamp is probably dead too


I am affraid that....

But what is about compatibility between these pcb' s?

Any experience ?

_________________
Spasavanje podataka
Top
 Profile  
 
Doomer
 Post subject: Re: WD1600JS-00MHB1 --- Help !
PostPosted: March 20th, 2008, 15:48 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
PCB are comatable if you using original ROM

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
gsimon
 Post subject: Re: WD1600JS-00MHB1 --- Help !
PostPosted: March 21st, 2008, 4:39 
Offline

Joined: October 7th, 2005, 2:03
Posts: 152
Location: serbia
Doomer wrote:
PCB are comatable if you using original ROM


Yes , I am using original ROM....

PCBs:

2060-701335-003 REV B (with 88i6545-TF1)
and
2060-701335-005 REV A (with 88i6545-TF1)

look like same
but are they fully compatibley

and I suppose that if i put original ROM
is it changed FW revision?

_________________
Spasavanje podataka
Top
 Profile  
 
Doomer
 Post subject: Re: WD1600JS-00MHB1 --- Help !
PostPosted: March 22nd, 2008, 0:34 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
gsimon wrote:
but are they fully compatibley

Yes, they are
gsimon wrote:
and I suppose that if i put original ROM
is it changed FW revision?

indeed

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 40 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group