View topic - Playing with Seagate

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Playing with Seagate

Page 1 of 1

[ 11 posts ]

Previous topic | Next topic

Author

Message

jono-ats

Post subject: Playing with Seagate

Posted: April 21st, 2008, 11:21

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA

I wonder if anyone has had success "converting" a SATA Seagate 3.5" drive to an ATA (or visa versa)?

Jon

_________________
http://www.datasaversllc.com

Top

dobrevjetser

Post subject: Re: Playing with Seagate

Posted: April 21st, 2008, 13:24

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium

you mean changing the pcb's ?
I know for sure you can use the heads of a pata disk for a sata disk and vice versa. Just take care about the normal requirements for a head donor.
So changing the pcb's should work also.

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu

Top

pepe

Post subject: Re: Playing with Seagate

Posted: April 21st, 2008, 13:31

Joined: October 3rd, 2005, 0:40
Posts: 4755
Location: Hungary

Hi,

I am not that sure

maybe after writing correct Appcode.

pepe

_________________
Adatmentés - Data recovery

Top

salvationlaura

Post subject: Re: Playing with Seagate

Posted: April 21st, 2008, 22:00

Joined: January 26th, 2007, 22:49
Posts: 291
Location: Earth

jono-ats wrote:

I wonder if anyone has had success "converting" a SATA Seagate 3.5" drive to an ATA (or visa versa)?

Jon

What you mean, Jon?
what is the Coverting process?

_________________
SalvationDATA--Profesionnal Hard drive solution Provider. MSN: sales.laura@salvationdata.com

Top

jono-ats

Post subject: Re: Playing with Seagate

Posted: April 21st, 2008, 23:26

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA

Laura,

What I mean is swapping a SATA logic board onto an ATA drive (or visa versa) and making the new hybrid work.

Jon

_________________
http://www.datasaversllc.com

Top

gsimon

Post subject: Re: Playing with Seagate

Posted: April 22nd, 2008, 4:15

Joined: October 7th, 2005, 2:03
Posts: 152
Location: serbia

it works on Maxtor DM+9:

you can put pata pcb on sata hdd - and work...

vice versa - not work ...

but it is very rare situation....

_________________
Spasavanje podataka

Top

prodata

Post subject: Re: Playing with Seagate

Posted: April 22nd, 2008, 5:57

Joined: October 6th, 2005, 3:00
Posts: 657

maybe can be done when there is a sata bridge attached to sata PCB.

_________________
Спасибо
СУТИОНО / АПИНГ

Top

gsimon

Post subject: Re: Playing with Seagate

Posted: April 22nd, 2008, 7:50

Joined: October 7th, 2005, 2:03
Posts: 152
Location: serbia

it works on Maxtor DM+9:

you can put pata pcb on sata hdd - and work...

vice versa - not work ...

but it is very rare situation....

_________________
Spasavanje podataka

Top

rameez

Post subject: Re: Playing with Seagate

Posted: April 22nd, 2008, 15:57

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !

Also works in marvell drives but for saeagate i dont think it would work .

Top

pepe

Post subject: Re: Playing with Seagate

Posted: April 22nd, 2008, 18:20

Joined: October 3rd, 2005, 0:40
Posts: 4755
Location: Hungary

gsimon wrote:

it works on Maxtor DM+9:

you can put pata pcb on sata hdd - and work...

vice versa - not work ...

but it is very rare situation....

According to my experience:
It only works on <128GB drives, since if U put a PATA board onto a SATA drive, there will be no LBA48 support.
Also the drive won't work in UDMA mode, but in MWDMA only.
But if U write a compatible ATA overlay onto the SATA drive, it will solve these problems above.

pepe

_________________
Adatmentés - Data recovery

Top

sigitharjono

Post subject: Re: Playing with Seagate

Posted: April 23rd, 2008, 4:01

Joined: April 19th, 2006, 7:12
Posts: 63

I have success "converting" a SATA Seagate 3.5" drive to an ATA on Seagate B 7

Top

Page 1 of 1

[ 11 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 53 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum