I have a hdd gives rom is corrupted and head is continuesly clicking.
Hard disk has readiness.

So, I would like to update the rom.
Can any one have Rom.bin for the fujitsu Model MHT2040at , Firmware ce-0022.


thanks,
amit shah

Very, very much doubt the ROM is bad.

Anyway the ROM's for MHT and above are pretty much unique I believe.

More like head failure.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

At the intialize the utility it said the Rom is bad. So First I would like to check by writing rom.

Thanks,
amit shah

thinclient,

Well, wrong ROM for MHT can cause some clicking, but unlikely.

ROM for MHT is very unique, which means each drive has its own ROM.

Transporting ROM from one MHT to any other MHT will not work,
even if Model No, FW and all parameters match.

So to put it simply - you fuxxed if you don't have original ROM.

btw. what program you use which reports "corrupted ROM" ?

Do you mean "ROM reading is not implemented in this utility...... Started using defaults"??? (or something like that)

This does not mean the ROM is bad.

My moneys' on the heads

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Hi,

I would confirm Sean...

pepe

_________________
Adatmentés - Data recovery