Uploading ROM

[unknown]

Hello friends,

My question is which parameters should I match to upload a ROM file ?

Is it full model parameters only ? or full DCM parameters only ? or both ?

thanks for any help

[jono-ats]

The same ROM version, if possible.

If unknown . . . . as with a blown ROM . . . . with WD drives, the same and complete model number (e.g. WD400BB-23JHC0) is often enough. To get closer you can match DCM and date but it's not usually necessary in my experience.

[unknown]

Thanks for advice Jono-ats

Thank you

[rameez]

The same ROM version, if possible.

If unknown . . . . as with a blown ROM . . . . with WD drives, the same and complete model number (e.g. WD400BB-23JHC0) is often enough. To get closer you can match DCM and date but it's not usually necessary in my experience.

Not necessary in normal WD drive but as for marvell its not the same .

[unknown]

Hello Rameez,

What should I match when uploading ROM with WD Drives ?

Thank you

[rameez]

The CPU should be same while changing ROM.

[unknown]

Thank you Rameez