Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

SGT 72.9 ST3802110A F/w 2.AAA

August 12th, 2008, 1:51

I need ROM for this Seagate Model

7200.9
ST3802110A
F/w : 2.AAA

I need this ROM

Please somebody have it from SD please send to me
sutiono668@yahoo.com.sg

thanks

Aping

Re: SGT 72.9 ST3802110A F/w 2.AAA

August 12th, 2008, 6:09

Hi,
ST3160212A.ZIP

Mikippp

Re: SGT 72.9 ST3802110A F/w 2.AAA

August 12th, 2008, 22:38

Thanks You friend
:)

Re: SGT 72.9 ST3802110A F/w 2.AAA

August 13th, 2008, 4:48

i'm very sorry. it can not work..

error reading application code.
please somebody have this rom. please share.

Thanks

Aping

Re: SGT 72.9 ST3802110A F/w 2.AAA

August 13th, 2008, 7:35

Prodata, the drive was selfscanned for a chance? Pm me.

Re: SGT 72.9 ST3802110A F/w 2.AAA

August 14th, 2008, 14:47

Error Reading Application Code.

Could this be a ROM issue in 7200.9 drives ?

Re: SGT 72.9 ST3802110A F/w 2.AAA

August 14th, 2008, 16:02

Yes, could be. I had some case and in two the corruption did not prevent the drive from starting.... with obvious erratic behaviour but the drive DID cal and report readiness. Any command hanged the drive.

Re: SGT 72.9 ST3802110A F/w 2.AAA

August 15th, 2008, 14:35

I just replaced the drive with a working pcb , i got the same msg on terminal .
So its 100% its not ROM problem its app code corruption in SA .
Post a reply