hi
i have a hdd m password WD usb3
i doing slove slow......
i access to all sector (by terminal)
all Modules ok
heads ok
pcb ok
by cable usb3 no read sector
now hdd detecting in windows and massege formating
but i use all option recovery but no recovery
Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 6
Cyl Count............................... : 256

Zone allocation table................... : Ok
SA SPT.................................. : 1372

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 256 Kb
ROM version............................. : 65.04J
ROM generation.......................... : 65.04J
Link table version...................... : 05.0F.
Consolidated ROM version................ : 00650004

ROM Modules:
Flash ROM dir reading................... : Ok
SA regions address...................... : by default
SA Translator loading................... : Ok

Heads configuration..................... : by map
Heads number............................ : 6
Heads number in use..................... : 6
Switched off heads...................... : No
Heads map............................... : 0,1,2,3,4,5
ROM Firmware version.................... : 00650004

Service area:
Permanent overlay....................... : Loaded
SA dir reading (ID)..................... : Ok
SA Access............................... : Copy 0,Copy 1

Configuration reading................... : Ok
Master Password......................... : has not been set
User Password........................... : has not been set

plz my help
thank you

did you try DE for imaging this drive ?
have you tried changing head map ?

_________________
Data Recovery Pakistan

Drive in DE with USB cable sector in the wake of three black display
However, terminals in green, but the speed is very very low
An alternative method, and I donot know it.

sorry i did't really understand it, can you please explain it little more.

If you can read sectors but speed is very very slow, than forget the alternate method.
you should verify the reading from random position is it same at all places (means very very slow)
try reverse imaging ..

see if it helps

_________________
Data Recovery Pakistan

Sounds like drive has a firmware issue, hence the slow behavior. It may have other issues as well, but the firmware is simple to check IF the drive allows you to (seems like it should).

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts

You need to convert to sata and work your way after that.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Good morning !
I do agree !
Either that or using a compatible SATA PCB !
Have a nice week.

Hello Friend
I did drive to SATA
Modules are correct.
Heads are correct
I read over the sector
But I can not retrieve any information
What should I do

Check Re-Lo list for entries and apply the slow issue fix.
Also if heads are dying the drive might not initialize the translator.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

hi
what i doing for initialize the translator.
thanks

I guess that you can try smart hot swap or do head map in RAM if you have DE.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

sorry
you can remot my system?
by team viwer

Hi there !
Sorry, it would be dificult for me to do a "hot swap" or a "smart hot swap" without having the drive with me. Even if i were to instruct you how to do so.
I could check with PC3K and try to do head map in RAM and try to clone with DE, but i assume you already tryed that.

Also i'm not at home (vacations) and i'm using a portable / mobile 4G network adaptor and i'm spending some vacations on a part of the country that have very BAD network coverage, so teamviewer+skype or even teamviewer alone would be VERY SLOW and almost impossible to use.

Also there is no guarantee that i would be of any help as well.

You can try to talk with my sister by skype as she is at home with the good interent connection, but expect to pay $200 USD at least if she manages to get your data back.

Regards.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.