View topic - Toshiba MQ01ABD050 BSY

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Toshiba MQ01ABD050 BSY

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

pclab

Post subject: Toshiba MQ01ABD050 BSY

Posted: June 13th, 2014, 14:40

Joined: July 12th, 2010, 4:38
Posts: 1455
Location: Portugal

Hi

Got this drive that can't ID...

After power on I get this:

Techno On............................... : Drive is not ready

Zone table.............................. : Zone table read error; Drive is not ready

G-List reading error.................... : G-List read error; Drive is not ready

CP Avalable............................. : 33,34,44,56,92,95,98,9A,9C,A2,A5,A7,A8,A9,AA,AD,AE ,B1,B3,BB,BF,C1,C5,C6,C7,C8,C9,CB,CD,D0,D1,D3,D4,D 6,D7,D9,DA,DB,DC,DD,EF,F1,F3,F4,F7,F8,FA,FB,FC,FF

The drive tries to calibrate (some very low noises) and sometimes can get Ready, other times, stay Busy.
Can this be only the G-list error?
I have tried to clean it, but I always get the drive Busy....
Thank You

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

MindMergepk

Post subject: Re: Toshiba MQ01ABD050 BSY

Posted: June 13th, 2014, 17:04

Joined: December 8th, 2013, 4:48
Posts: 842
Location: Pakistan

Have you tried isolating Head Contacts ?

_________________
Data Recovery Pakistan

Top

pclab

Post subject: Re: Toshiba MQ01ABD050 BSY

Posted: June 17th, 2014, 8:01

Joined: July 12th, 2010, 4:38
Posts: 1455
Location: Portugal

Yes, didn't helped...

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

MindMergepk

Post subject: Re: Toshiba MQ01ABD050 BSY

Posted: June 17th, 2014, 8:10

Joined: December 8th, 2013, 4:48
Posts: 842
Location: Pakistan

than most likely, media or head problem

_________________
Data Recovery Pakistan

Top

waqas_ali766

Post subject: Re: Toshiba MQ01ABD050 BSY

Posted: June 17th, 2014, 8:29

Joined: July 6th, 2013, 15:13
Posts: 311
Location: ISLAMABAD

Hello,
The Toshiba hdd stay busy because of continuous reading of bad area (Bad sector ) and assign it. when the damaged sector is read able then the hdd shows you ready status, some time it take about 30 minutes to become ready. after ready clear G list and extract data by cloning through MRT or pc3000.

Some times head or sub zones are damaged that's why it stay busy fro about 30 minute.

Regards
Waqas Ali

Top

pclab

Post subject: Re: Toshiba MQ01ABD050 BSY

Posted: June 17th, 2014, 13:12

Joined: July 12th, 2010, 4:38
Posts: 1455
Location: Portugal

This is a FW problem (translator...) If I read thru utility on PC3K I can access data. The problem is that I don't have DE....
Still working on it.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

pclab

Post subject: Re: Toshiba MQ01ABD050 BSY

Posted: June 17th, 2014, 15:02

Joined: July 12th, 2010, 4:38
Posts: 1455
Location: Portugal

Got it imaging finally eheheh

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

Nick_CT

Post subject: Re: Toshiba MQ01ABD050 BSY

Posted: June 23rd, 2014, 4:55

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa

Are you sure this was translator issue?

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town

Top

pclab

Post subject: Re: Toshiba MQ01ABD050 BSY

Posted: July 1st, 2014, 5:32

Joined: July 12th, 2010, 4:38
Posts: 1455
Location: Portugal

Yes, the case was closed with 100% recovery.
At least with this solution I could get the data.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

Page 1 of 1

[ 9 posts ]

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 117 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum