Hi

I got SEAGATE BARRACUDA ST380013AS it gets ready and Drive ID is full and correct When I do sector edit or enter any command hdd is busy. Terminal window is:

What is do hdd reboot? and What is meaning wrong in terminal?

Have you tried to do a headmap and select each one and test?
Seems to be a bad head...

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Agree with Split Heads seems bad,

try swap Donor Heads before that try using Seagate Utility while creating Task with LDR..

_________________
Specialized in Physical Data Recovery

https://lifeguarddatarecovery.com

Firstly, Thanks a lot for response. İn this case, PC 3000 dont allow creating head map. I saw HDD ID and SERIAL Number. But If I want to read sector But HDD can read so little sector then HDD stoped. Dırectly, Before that I swap head from donor disk to patient disk. What should I do?

Can test heads manually in terminal. Check manual on how.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

It can be a pending issue with bad heads. Create a task with active utility actions, and try to solve the pending issue with head map changing at once.