MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
sempre
 Post subject: MODEL PALO
PostPosted: June 27th, 2008, 15:35 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Hi to all!

Bad two heads?

look logs...

Family selected: PALO
Model................................... : SP0802N

Technological ID
Flash version........................... : tk04b
Heads number............................ : 2
SA SPT.................................. : 832

Modules table used by default

Service Area
Head map................................ : Drive is not ready
Part Number............................. : Drive is not ready
Password info is not loaded: Drive is not ready
Soft reset ...
Ok


HDD resources backup

Read ROM via terminal
Into folder............................. : <HDD Profile>\Data\SABackup\ROM
Test completed
No HDD response

HDD resources backup

Read ROM via terminal
Into folder............................. : <HDD Profile>\Data\SABackup\ROM
Test completed
No HDD response

HDD resources backup

Read ROM via terminal
Into folder............................. : <HDD Profile>\Data\SABackup\ROM
Test completed
No HDD response

Read ROM via terminal
Into folder............................. : <HDD Profile>\Data\ROM
No HDD response

SA structure test

Reading modules...
00 FSI.................................. : Drive is not ready
02 FIT.................................. : Drive is not ready
04 MLIST................................ : Drive is not ready
05 SRVTBL............................... : Drive is not ready
58 SEEKTIME............................. : Drive is not ready
5D CONFIG2.............................. : Drive is not ready
06 CONFIG............................... : Drive is not ready
07 SNTBL................................ : Drive is not ready
08 BISPT................................ : Drive is not ready
09 BRSLT................................ : Drive is not ready
0A CRITERIA............................. : Drive is not ready
Drive is not ready
Soft reset ...
Ok


Term log

SpnOk
H: +00000
SK C: 0000FB69
SpnOk
DAC:-00419
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
ENG>SRV>SpnOk
DAC:-00181
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
SK C: 0000F732
UF: Seq Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
SK C: 0000F92F
UF: Seq Sk err
H: +00001
UF: 1. 1st Gray err
ENG>SRV>SpnOk
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
SK C: 0000F91E
SpnOk
DAC:-00145
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
SK C: 0000F44C
UF: Seq Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
ENG>SRV>SpnOk
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
SK C: 0000F4BE
SpnOk
DAC:-00158
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
H: +00000
UF: 3. 1st Sk err
H: +00001
UF: 1. 1st Gray err
ENG>SRV>

_________________
Нет ничего невозможного
Top
 Profile  
 
N.C.
 Post subject: Re: MODEL PALO
PostPosted: June 27th, 2008, 19:28 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
Hi,

i have never used pc3k, but it looks like head 0 crash.

Somebody? :shock:

Janos
Top
 Profile  
 
darkforce1
 Post subject: Re: MODEL PALO
PostPosted: June 28th, 2008, 9:42 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
Head gone.

DF :)

_________________
DF :)
www.datatracksystem.net
Top
 Profile  
 
Doomer
 Post subject: Re: MODEL PALO
PostPosted: July 1st, 2008, 18:17 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
PCB or preamp most likely

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
sempre
 Post subject: Re: MODEL PALO
PostPosted: July 2nd, 2008, 8:54 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Doomer wrote:
PCB or preamp most likely


I will verify preamp!

Thanks Doomer!!!
:good:

_________________
Нет ничего невозможного
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: gps31 and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group