ATA Convertor

[ppumkin]

Any body know where i can purcahse ce-ata to ide - to be used with hs161jq type drives
thanks

[donordrives]

One comes with PC3000, I know that much.

[ppumkin]

So nobody here can recover data from a CEATA hdd.. nice.

Ill just go and buy an EEEPC...

<grumbles>

[ppumkin]

http://forum.hddguru.com/ata-adaptors-available-t12764.html

2009 - no solution..

but now..

Attachments

SD-SDIO-MMC-CEATA-Device-HVP-Flyer.pdf

(201.49 KiB) Downloaded 1360 times

PB-SD2.1_MMC4.4-CE_ATA-AHB-Mem-Ctrlr-IP.pdf

(185.58 KiB) Downloaded 1183 times

[ppumkin]

Germany, Austria, Switzerland,Italy, Belguim
TRIAS Mikroelektronik GmbH
Moerser Landstrasse 408
47802 Krefeld
Germany
Tel : +49-2151-95301-0
Fax: +49-2151-95301-15
Email: info@trias-mikro.de

UK, Ireland, France, Spain, Portugal, Norway
EDA4YOU
Salbeiweg 65
76149 Karlsruhe
Germany
Tel: +49-721-66 37 922
Fax: +49-721-66 37 921
Email: info@eda4you.eu

Finland, Sweden, Denmark
TRIAS Mikroelektronik GmbH
Moerser Landstrasse 408
47802 Krefeld
Germany
Tel : +49-2151-95301-0
Fax: +49-2151-95301-15
Email: info@trias-mikro.de

Russia, Poland, Romania
TRIAS Mikroelektronik GmbH
Moerser Landstrasse 408
47802 Krefeld
Germany
Tel : +49-2151-95301-0
Fax: +49-2151-95301-15
Email: info@trias-mikro.de

Israel
Arasan Chip Systems, Inc.
2010 North First Street,
Suite 510, San Jose
CA 95131, USA
Tel: +1-408-282-1600
Fax: +1-408-282-7800
Email: sales@arasan.com

[donordrives]

Anyone who owns a PC3000 UDMA can recover data from it. The adapter comes with a purchase of UDMA

[fzabkar]

If you're just doing logical recovery, could you make do with something like the following?

StarTech IDE1810U2Z Aluminum 1.8" USB 2.0 External Hard Drive Enclosure:
http://www.startech.com/item/IDE1810U2Z ... osure.aspx

[ppumkin]

Thanks for the link fzabkar- it says ceata zif/lif ; but there is no picture inside to actaully show whether its the smaller in width cable than the ordinary one.

I shall call e-buyer(uk associate of that site)- maybe somebody will be able to tell me. It should be good for use with logical recovery..
Or ill just buy it and see.

[networkpc3000]

hi,
if you just need external enclosure i have cheap one in stock.

[drc]

At least some of these drives are not CE-ATA

[Eric Lee]

Hi, Do you need the 1.8" CE ATA to 3.5" IDE and 2.5" adapter? If so, I have it,

Thanks,
Eric

[ppumkin]

Ah at last!

Its like this is it?

The zif cables are the ones you can buy everywhere for like the 1.8" Toshiba Apple drives or another.

Please notice this Samsung is almost 1/3 of the size and its CE technology.

Thanks.

Attachments

[ppumkin]

Hey ppumkin - is that what you need (see attached photo)

Ahh thanks Mate!!

PS Its not MMC- its actually sata..

Good tip anonymous!


PS This forum is da bomb with help!

Thanks for the help...

If you need one pm me.

Attachments

[drc]

I do not think this is accurate

[ppumkin]

What is not accurate- the MMC part or the SATA part.

Or both?

Do you have the pinouts for YPM09657 Marvel chip?

[drc]

The SATA part. Samsung's data sheet clearly states that hs161jq has a CE-ATA interface which is based on MMC. That said, there is a think-outside-the-box solution that does not require adapters at all...

[ppumkin]

I know- that's what i have been following the whole time after MMC. That's why this sata plug surprised me.

God. why is my box so blingin big...

Only thing i can think is use the ATA version of the pcb. But i assume that is not straightforward swap either..

[Persia2500]

that's ZIF ATA/100 if you got an IPod replace the drive , IPod usb connection works as ATA convertor .
you might need a $20 micro sata => normal sata depending on your recovery case .
Those ZIF connectors on pcb are mostly designed for max 15 time connect/disconnect.

[Persia2500]

if you got the drive orginal ZIF cable then its only a 5$ convertor

ce_usb-s.jpg (8.55 KiB) Viewed 19302 times

http://www.drivestar.org/product/converter/converter.htm

[drc]

That is for regular ZIF. CE-ATA is different.