View topic - WANTED PCB for WD6400aaks

Main » Forums home » Market

All times are UTC - 5 hours [ DST ]

WANTED PCB for WD6400aaks

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

prez

Post subject: WANTED PCB for WD6400aaks

Posted: March 25th, 2010, 8:52

Joined: March 25th, 2010, 8:42
Posts: 2
Location: NC,USA

MODEL: WD6400AAKS-75A7B0
S/N: WMASY250208
DCM: HARNHV2CA
ORIGIN: MALAYSIA
LBA: 1250263728
FIRMWARE: B0
PCB:2061-701537-E00 07PD3 XW 5B22 YGQC 3 0001040 9041 (WHITE LABEL),
2060-701537-003 REV A (ETCHED)

Top

networkpc3000

Post subject: Re: WANTED PCB for WD6400aaks

Posted: March 25th, 2010, 20:28

Joined: December 16th, 2007, 10:26
Posts: 1151

hi,
have in stock. please contact me by email or MSN. could be help you program firmware into MCU. thanks.

_________________
data recovery service[/b]

Top

Eric Lee

Post subject: Re: WANTED PCB for WD6400aaks

Posted: March 26th, 2010, 2:34

Joined: April 25th, 2009, 11:42
Posts: 382
Location: China

Hi,

We have this working PCB too, pls contact my hotmail.

Thanks
Eric

_________________
Provided HDD PCBs and donor HDD, Real in stock
eric_lee8341@hotmail.com

Top

hddmania

Post subject: Re: WANTED PCB for WD6400aaks

Posted: March 29th, 2010, 4:45

Joined: March 22nd, 2009, 0:19
Posts: 269
Location: behind the platter

Before you go buy the donor drive, what's wrong with your hard drive??? This AAKS model is often time out side of DIY arena due to the PCB design.

Top

Eric Lee

Post subject: Re: WANTED PCB for WD6400aaks

Posted: March 29th, 2010, 6:19

Joined: April 25th, 2009, 11:42
Posts: 382
Location: China

hddmania wrote:

Before you go buy the donor drive, what's wrong with your hard drive??? This AAKS model is often time out side of DIY arena due to the PCB design.

Agreed, for this model, you also need to reprogram rom. ^^

_________________
Provided HDD PCBs and donor HDD, Real in stock
eric_lee8341@hotmail.com

Top

prez

Post subject: Re: WANTED PCB for WD6400aaks

Posted: March 29th, 2010, 9:52

Joined: March 25th, 2010, 8:42
Posts: 2
Location: NC,USA

Well, problem is that it won't power up, tried 2 different sources. I used it via USB adaptor (have an older pc w/o SATA) to transfer files from another drive for reformat. After reformatting the other drive, this one failed. All I have on this drive are PSP & PS2 backup iso files. Everything else on it is either expendable or on another pc.

I did however plan to replace my existing secondary drive (seagate 120gb) with this one(via pci SATA controller). The problem drive was only used for 15 months in my brother-in-law's pc....they thought it crashed and bought a new 750gb from Dell.

Top

hddmania

Post subject: Re: WANTED PCB for WD6400aaks

Posted: March 30th, 2010, 0:37

Joined: March 22nd, 2009, 0:19
Posts: 269
Location: behind the platter

Awwww.

I would say RMA the drive. It will cost you more to find the replacement PCB that will work on your drive.

Top

Page 1 of 1

[ 7 posts ]

Main » Forums home » Market

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum