Hi, does anyone have one of these? Burnt out PCB here


Western Digital Caviar WD1600

Model: WD1600JD-00HBB0
DATE: 17 Jul 2004
DCM: HSBACTJAA
Revision #: 2060-001267-001 Rev A


Thanks

I have a WD1600AABS in hand. Let me know if it meets your needs. Thanks

Unfortunately, this PCB is not compatible.

_________________
www.datarecoveryne.com

Almost certainly will have this PCB but you WILL need to transfer the ROM chip. Or we can do it for a small fee. PM or email if interested.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Hi
I have the same disk - WD Caviar WD1600JB and the pcb on mine burned out too..I watched it happen...!

Up until the the drive was working fine, I removed the pcb and can see the damaged chip, top right most chip on the pcb..which I am assuming is not the ROM chip referred to above..I assume that refers to the biggest square chip in the centre of the board?

So my point is, please, pcimage.co.uk, what would be the cost of returning the drive complete with damaged pcb for reference and matching, and having it returned to me with the replacement pcb installed including ROM transferral?

If you would prefer, please send an IM. As this is somewhat of an odd request, I have posted it here rather than via your web page.

Thanks for reading!

Actually I just saw your online quote request, I have submitted there too. Thanks