MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: WD4000AAKS start failure
PostPosted: April 7th, 2010, 7:13 
Offline

Joined: April 7th, 2010, 6:20
Posts: 4
Location: Ukraine
Hello gurus)
Subj WDC WD4000AAKS-00YGA0-12.01C02-WD-WCAS8527514
Powers on, spins up, few short silent clicks, spin down and ups again. After 3 times repeating this drive spins down completely. I need data from drive.
After series of tests I found a flash FW corruption: 07 and 08 mods have corrupted block CS`s (record CS`s is OK).
Is it really a FW corruption? Where to get a complete ROM? File archive have nothing suitable as I guess.
Also I must tell that there are word "ROYL" mentioned in some flash locations and modules (see attachment with logs).

What i have done so far: clean entire PCB and contacts of HDA with eraser and with solvent, examined fuses/TVS/3.3V supply (its OK). All this gave no effect.
Software: I had read flash, some modules. Check_wd utility said that there are corrupted files headers on different drive heads (see logs). While running utils drive spins up for aa short time and spins down after series of ckicks.


Attachments:
File comment: Flash, modules, logs
WDC WD4000AAKS-00YGA0-12.01C02-WD-WCAS8527514.rar [173.84 KiB]
Downloaded 317 times
Top
 Profile  
 
 Post subject: Re: WD4000AAKS start failure
PostPosted: April 7th, 2010, 7:51 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Did you check it with PC3000 UDMA or something like that ?


Top
 Profile  
 
 Post subject: Re: WD4000AAKS start failure
PostPosted: April 7th, 2010, 7:55 
Offline

Joined: April 7th, 2010, 6:20
Posts: 4
Location: Ukraine
no just using P2 Cel 700MHz via Sata-to-IDE convertor StLab S-250 and external PSU, under DOS and COM utilities from nazyura.
model notation taken from file archive


Top
 Profile  
 
 Post subject: Re: WD4000AAKS start failure
PostPosted: April 7th, 2010, 8:03 
Offline

Joined: April 7th, 2010, 6:20
Posts: 4
Location: Ukraine
sorry, here is correct "Chk_csum.txt" file from attachment


Attachments:
Chk_csum.txt [1.53 KiB]
Downloaded 517 times
Top
 Profile  
 
 Post subject: Re: WD4000AAKS start failure
PostPosted: April 7th, 2010, 8:08 
Offline

Joined: October 13th, 2008, 7:29
Posts: 1493
Its usually heads. one or more heads have failed.


Top
 Profile  
 
 Post subject: Re: WD4000AAKS start failure
PostPosted: April 7th, 2010, 9:48 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3235
Location: USA
Just a terminology thing, but drive firmware is not "flash"

_________________
You don't have to backup all of your files, just the ones you want to keep.


Top
 Profile  
 
 Post subject: Re: WD4000AAKS start failure
PostPosted: April 7th, 2010, 10:07 
Offline

Joined: April 7th, 2010, 6:20
Posts: 4
Location: Ukraine
HDD Spaz, you may be right, problem looks like Samsung LED13 Servo unlatch error and usually caused by bad head.
btw i`ve got similar flash 12.01C01, probably correct, and check utility also told it have CS error. so i`m not sure in flash error


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group