MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Seagate Model: ST380013AS - PCB Chip Burn and Smoke
PostPosted: April 10th, 2010, 2:25 
Offline

Joined: May 19th, 2009, 5:05
Posts: 97
Location: Singapore
Hi

I have a seagate 80GB SATA 3.5" Disk

Model: ST380013AS
S/N: 5MR17WZB
P/N: 9W2812-231
DATE CODE: 05383

The user connected hard disk to an external usb casing to transfer data, but as soon as the external casing was power on, smoke came from the hard disk PCB and the whole room power tripped.

Please find the attached picture the red circle chip located near the SATA connector is giving out smoke when powered on.

What chip is the name of the chip?

Is it possible to replace chip from another similar hard disk and recover data?

Thanks for your help

Cheers
-Jag


Attachments:
snapshot-1270788233.585231.jpg
snapshot-1270788233.585231.jpg [ 180.94 KiB | Viewed 5184 times ]
Top
 Profile  
 
 Post subject: Re: Seagate Model: ST380013AS - PCB Chip Burn and Smoke
PostPosted: April 10th, 2010, 2:58 
Offline
User avatar

Joined: December 16th, 2007, 10:26
Posts: 1151
it's diode. just remove it if it short.

_________________
data recovery service[/b]


Top
 Profile  
 
 Post subject: Re: Seagate Model: ST380013AS - PCB Chip Burn and Smoke
PostPosted: April 10th, 2010, 4:56 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
I believe that's the 5V TVS diode. If you can trust your power supply, you can remove it and run without it, or you can replace it with an SMAJ5.0A.

Here is one possible substitute (Farnell has others):
http://sg.farnell.com/multicomp/smaj5-0 ... dp/1578997

Just to be sure, confirm that the diode's pins connect to the +5V and ground pins in the SATA connector:
http://pinouts.ru/Power/sata-power_pinout.shtml


Top
 Profile  
 
 Post subject: Re: Seagate Model: ST380013AS - PCB Chip Burn and Smoke
PostPosted: April 10th, 2010, 5:34 
Offline

Joined: May 19th, 2009, 5:05
Posts: 97
Location: Singapore
Thanks for all your input

I have a similar hard disk, so I will take the diode from working hard disk and solder on to bad hard disk and try to recover

Cheers
-Jag


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 166 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group