View topic - Fimware needed 3.AAC

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Fimware needed 3.AAC - Seagate

Page 1 of 1

[ 13 posts ]

Previous topic | Next topic

Author

Message

venkig

Post subject: Fimware needed 3.AAC - Seagate

Posted: April 30th, 2010, 9:31

Joined: April 15th, 2010, 0:46
Posts: 25
Location: Bangalore, India

I need the below firmware for my Seagate 250GB SATA HDD.

Firmware: 3. AAC
Model Number: ST3200310AS

Top

BlackST

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: April 30th, 2010, 10:34

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

IF the drive is 250 GB it CAN'T be ST3200310AS

Top

venkig

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: April 30th, 2010, 10:41

Joined: April 15th, 2010, 0:46
Posts: 25
Location: Bangalore, India

Oops.

The model is ST3250310AS

Top

ccc

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: April 30th, 2010, 11:02

Joined: January 9th, 2007, 11:12
Posts: 410
Location: Romania

You can find it here:
http://files.hddguru.com/download/PC-30 ... Y26404.rar

Rgds

_________________
www.datasave.ro

Top

venkig

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: April 30th, 2010, 11:43

Joined: April 15th, 2010, 0:46
Posts: 25
Location: Bangalore, India

Well the P/N number doesn't match. Here is the complete detail

Model Number: ST3200310AS
Product Number: 9EU132-305
Firmware: 3. AAC
Site Code: WU
Product of China

Top

harddrivespecialist

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: April 30th, 2010, 12:25

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA

If P/N number has to match for you, refer to a data recovery pro to recover data from that drive.

_________________
www.datarecoveryne.com

Top

networkpc3000

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: April 30th, 2010, 20:02

Joined: December 16th, 2007, 10:26
Posts: 1151

i am interesting in why had to match PN

_________________
data recovery service[/b]

Top

ccc

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: May 1st, 2010, 3:41

Joined: January 9th, 2007, 11:12
Posts: 410
Location: Romania

BTW Why do you need the firmware for?.....It looks that you don't know much about hdds, so what do you do with firmware files?

Rgds

_________________
www.datasave.ro

Top

venkig

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: May 5th, 2010, 2:48

Joined: April 15th, 2010, 0:46
Posts: 25
Location: Bangalore, India

I want the firmware to flash my hard-drive, chances are my hard-drive has got corrupted firmware.

Is there any way to backup the current firmware and write this new firmware, how do i go about doing that ?

Also all this has to be done via bootable diskette.

Top

pcimage

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: May 5th, 2010, 3:08

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

venkig wrote:

NO! NO! NO!

Your hdd is not a cellphone, you cannot simply "flash" firmware to/from HDD with freeby s/w.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

NetworkPro

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: December 28th, 2010, 4:18

Joined: December 28th, 2010, 4:08
Posts: 2
Location: SOFIA, Bulgaria

Hello guys,

I have the same HDD (ST3250AS fw 3.AAC).

I was able to format track 0 using Seagate SeaTools
but all other "tests" fail

I am also able to create a partition (no errors) but I am not able to format it (error reading sector).

I was also able to run a MHDD scan starting from a certain sector, but even when I change the starting sector
each time the first one is unreadable while the rest are just fine like a new HDD.

It seems to me the HDD firmware is defective.

I would greatly appreciate it if you guys could help me out with this.
What can I do to make this drive work again?

Thank you.

Top

Samo

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: December 28th, 2010, 5:22

Joined: September 27th, 2005, 4:26
Posts: 505
Location: Bulgaria, Sofia

Трябва ти специализиран хардуер и софтуер за да можеш да "пипаш" фирмуера на този диск и знания как да го направиш. По добре си похарчи парите за един нов с гаранция.
Иначе "за спорта" може да му пуснеш security erase или erase през MHDD.

_________________
DataRecovery.bg

Top

NetworkPro

Post subject: Re: Fimware needed 3.AAC - Seagate

Posted: December 28th, 2010, 8:20

Joined: December 28th, 2010, 4:08
Posts: 2
Location: SOFIA, Bulgaria

Samo wrote:

You need specialized hardware and software so you can "touch" the firmware on this disk and knowledge of how to do it. Better to spend money for a new one with a warranty.
Otherwise, "for sport" you could try security erase or erase in MHDD..

Thank you Samo,

I could try these when I have time. I think I already tried them tough.
Can I sell it to you? If you can use it for something. If yes - my skype is hypnologic

Top

Page 1 of 1

[ 13 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 53 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum