MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 2
  [ 26 posts ]  Go to page 1, 2  Next
  Previous topic | Next topic 
Author Message
joe1203
 Post subject: WD5002ABYS detectable but not working
PostPosted: May 4th, 2010, 1:25 
Offline

Joined: July 16th, 2009, 0:08
Posts: 26
Location: United Kingdom
My WD5002ABYS can be detected by BIOS but fail to boot or access
During POST, it shows smart capability is 'none'
It has no 'clicks' sound

I am thinking about PCB swap but not sure if it works. :?: :?:
Top
 Profile  
 
unknown
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 4th, 2010, 1:29 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Most likely, FW problem.

Forget this :
Quote:
I am thinking about PCB swap but not sure if it works.


Top
 Profile  
 
pcimage
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 4th, 2010, 3:02 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
You are certainly wasting your time on a PCB swap if the drive spins up and is seen in BIOS.

A) It's probably a firmware issue.
B) It "could" be a bad PCB, but this drive has no external ROM and the unique info is written into the MCU which you cannot rewrite without the appropriate equipment.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
joe1203
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 4th, 2010, 9:10 
Offline

Joined: July 16th, 2009, 0:08
Posts: 26
Location: United Kingdom
Thanks expert!
That's means I need to rebuild the SA area......
Top
 Profile  
 
hddguy
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 4th, 2010, 9:22 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
joe1203 wrote:
Thanks expert!
That's means I need to rebuild the SA area......


You make it sound easy...
Top
 Profile  
 
joe1203
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 4th, 2010, 21:46 
Offline

Joined: July 16th, 2009, 0:08
Posts: 26
Location: United Kingdom
hddguy wrote:
joe1203 wrote:
Thanks expert!
That's means I need to rebuild the SA area......


You make it sound easy...


Is it difficult ? I expect it can be done with special software.
Top
 Profile  
 
Zero Alpha
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 0:06 
Offline
User avatar

Joined: April 7th, 2009, 21:36
Posts: 487
If you want to see your data it will need to be delivered to a pro. There are UK members on this forum you can contact.

_________________
Zero Alpha: zeroalpha.com.au
Find Cheap Donor Drives App: https://www.zeroalpha.com.au/donor-drive-app Updated February 2026
Top
 Profile  
 
unknown
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 1:38 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Quote:
Is it difficult ? I expect it can be done with special software.

Yes, special software and special hardware too. And the most important part ( you have to know what you are doing )
Top
 Profile  
 
joe1203
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 5:33 
Offline

Joined: July 16th, 2009, 0:08
Posts: 26
Location: United Kingdom
I am thinking to purchase SD HD Doctor since they offer WD specific version at just US$2XX only.
They claim it works for ROYL series.

I believe US$2XX is much cheaper than finding pros to fix it.
Top
 Profile  
 
hddguy
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 6:35 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
The difference is that a pro knows what he is doing :wink:
Top
 Profile  
 
BlackST
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 7:52 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Good luck, you REALLY need it.
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 9:06 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
People think it's a one touch solution.

_________________
www.datarecoveryne.com
Top
 Profile  
 
joe1203
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 11:49 
Offline

Joined: July 16th, 2009, 0:08
Posts: 26
Location: United Kingdom
hddguy wrote:
The difference is that a pro knows what he is doing :wink:


agree
Top
 Profile  
 
joe1203
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 11:54 
Offline

Joined: July 16th, 2009, 0:08
Posts: 26
Location: United Kingdom
harddrivespecialist wrote:
People think it's a one touch solution.


Sometimes, life is that simple.
I have too many friends having mouse problem just because of loosen connection, :lol: :lol:

Anyway, i will get a quote from commercial company first to see if it is worth to DIY
Top
 Profile  
 
hddguy
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 12:05 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
joe1203 wrote:
harddrivespecialist wrote:
People think it's a one touch solution.


Sometimes, life is that simple.
I have too many friends having mouse problem just because of loosen connection, :lol: :lol:

Anyway, i will get a quote from commercial company first to see if it is worth to DIY


I have a friend who changed his flat tire on his car. After this, he tries to change his own engine. Now he has no car.

Before any recovery attempts you need to completely understand what is is you are working with. If you truly knew and understood Hard Disk geometry, you would not be so quick to attempt DIY, especially in cases where data is needed
Top
 Profile  
 
networkpc3000
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 21:01 
Offline
User avatar

Joined: December 16th, 2007, 10:26
Posts: 1151
BlackST wrote:
Good luck, you REALLY need it.
and place gods around.

_________________
data recovery service[/b]
Top
 Profile  
 
joe1203
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 22:03 
Offline

Joined: July 16th, 2009, 0:08
Posts: 26
Location: United Kingdom
hddguy wrote:
joe1203 wrote:
harddrivespecialist wrote:
People think it's a one touch solution.


Sometimes, life is that simple.
I have too many friends having mouse problem just because of loosen connection, :lol: :lol:

Anyway, i will get a quote from commercial company first to see if it is worth to DIY


I have a friend who changed his flat tire on his car. After this, he tries to change his own engine. Now he has no car.

Before any recovery attempts you need to completely understand what is is you are working with. If you truly knew and understood Hard Disk geometry, you would not be so quick to attempt DIY, especially in cases where data is needed

Thank you for your advice.
I guess since I am planning to fix the broken FW, and I don't need to open the drive, I feel that it is not that risky.
btw, what is the brand name of your friend's car?
Top
 Profile  
 
joe1203
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 5th, 2010, 22:07 
Offline

Joined: July 16th, 2009, 0:08
Posts: 26
Location: United Kingdom
networkpc3000 wrote:
BlackST wrote:
Good luck, you REALLY need it.
and place gods around.

god is dead :D :D
Top
 Profile  
 
hddguy
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 6th, 2010, 2:24 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
joe1203 wrote:
I guess since I am planning to fix the broken FW, and I don't need to open the drive, I feel that it is not that risky.?


Botched DIY attempts are often salvageable at a cost, but seriously damaged SA often is not.

It is risky.
Top
 Profile  
 
BlackST
 Post subject: Re: WD5002ABYS detectable but not working
PostPosted: May 6th, 2010, 7:23 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
joe1203 wrote:
god is dead :D :D


... your drive too and your wallet will not be so good , I think. :D

Just curious : what do you plan to do with SD box ? Have you ever worked with it ?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 26 posts ]  Go to page 1, 2  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 121 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group